jamesthebikeguy
Member
- :
- MS3 GT
Bump back up to the top
jamesthebikeguy Part out thread
- Thread starter jamesthebikeguy
- Start date
- Status
05maz3subd
Member
- :
- Mazda 3 lava orange hb manual
you'll bump but not answer... booo...
jamesthebikeguy
Member
- :
- MS3 GT
No sorry, The car is being sold stock, and part of the GT appeal is the tail lights.
BSD will be work, and the rack is spoken for at the moment.
Suspension has already been sold. Sorry
05maz3subd
Member
- :
- Mazda 3 lava orange hb manual
i know you have to take the oil pan off and do all that jazz, what exactly does it the bs do? i found tutorials but not the purpose of the mod
jamesthebikeguy
Member
- :
- MS3 GT
Not sure it does anything on a N/A 3.
On the speeds, at the higher horsepowers I.E. 300+ it removes some liability of the BSD binding up, and creating a motor failure. On a N/A 3 I doubt that the motor has enough force to cause a failure on the balance shaft.
The other benefit that is available for both cars, is that the reduction on rotating mass, the BS weights about 18 lbs (so ive read) and will yield quicker response on revs and slightly faster acceleration.
On the speeds, at the higher horsepowers I.E. 300+ it removes some liability of the BSD binding up, and creating a motor failure. On a N/A 3 I doubt that the motor has enough force to cause a failure on the balance shaft.
The other benefit that is available for both cars, is that the reduction on rotating mass, the BS weights about 18 lbs (so ive read) and will yield quicker response on revs and slightly faster acceleration.
05maz3subd
Member
- :
- Mazda 3 lava orange hb manual
yeah i see what you mean. i have to get camber plates so i dont get bad tread wear. ill let you know if i can get it, but dont hold up if another buyer offers
thanks man
thanks man
skimzspeed3
Member
- :
- Mazdaspeed3
Payment sent for the roof feet/fit kit. Thanks James.
- Status
