Injen SRI Window issue

[jonnyboy]

I just installed an Injen SRI on my 2012 MS3, however when I started the car again my one-touch window did not work. I can roll it up and down, just the one-touch function does not work. I do not understand what could be the issue, I did not mess with anything electrical. The fuses are still good. If anyone has a clue what the issue may be please let me know.

Also I have seen at least one other person with the same issue when I searched the problem.

 

[nutmeg]

it must be reset every time power is disconnected, the owner book tells you how

if it still doesn't work, this happened to me there is a service bulletin for it, you have to take it to the dealer so they can lube up the window track.

there is a sensor so if you auto-up with your arm or neck or whatever through the window, it will not guillotine you to bits... this needs to be calibrated.

 

[phoenixosu]

Roll the window all the way down and hold the button for ~3 seconds, roll up and hold for ~3 seconds, all the way down and hold for ~3 seconds, that reset the sensor for me when this happened in my car.

 

[jonnyboy]

Thanks guys, I fixed it by following the step above and it works fine now. I just thought it was weird that disconnecting the battery does this.