FS: Krank Vents, FSDE coils, 99 FSDE V/Cvr, Couplers, T-Bolt Clamps

[metallargy]

NEW THREAD: http://www.mazdas247.com/forum/showthread.php?p=5344038#post5344038

• Autometer Vacuum/Boost Gauge
  2 1/16" gauge. Procomp Ultra Lite. 30in/20psi.
  SOLD!

• Autometer Oil Pressure Gauge
  2 1/16" gauge. Procomp Ultra Lite. 100 psi.
  Includes NEW SENSOR. Changed my interior scheme, so I just reused the sensor and I'm selling the new one w/this gauge.
  SOLD!

• Autometer A/F Ratio Gauge
  2 1/16" gauge. Procomp Ultra Lite. Used it w/my LC1.
  $30 + shipping OBO

• FSDE Cam Gears
  Have one complete set, and one individual
  $10 each + shipping OBO

• Krank Vents
  One is used (2k miles), and the other one was swapped under warranty and is still new in the bag. Came off my car that's seen less than 5k in 3 years, thus the low mileage. Revised my turbo PCV setup (again), so these weren't needed anymore.
  http://mazdas247.com/vbb225/showthread.php?t=123712448
  http://mazdas247.com/vbb225/showpost.php?p=3752998&postcount=4420
  There's plenty more discussions here, just thought I'd put those up.
  SOLD!

• FSDE Coils
  Have 2 different sets:
  
  Ohm specs revised 6/30/10 - calibrated Fluke
  
  30k set: Primary resistance - 1.595 & 1.516 ohms.
  Secondary resistance - 9.13k & 9.20k ohms. - SOLD!
  70k set: Primary resistance - 1.562k & 1.501k ohms.
  Secondary resistance - 9.20k & 9.30k ohms.
  
  Both sets were used on my car, but I run a different ignition setup now.
  They ohm out about the same, so the only difference is perceived mileage. (I'm assuming mine weren't replaced before I got the car)
  $20 + shipping per set OBO

• 00 626 Valve Cover
  From a 99 626, IIRC. Has the cam sensor spot, but not the mounting bosses for the V/Cvr mounted coils. (for those w/aftermarket ignitions or FP coilpacks)
  SOLD!

• T3 Oil Inlet Flange
  Aluminum. 1/8" NPT fitting. New, never been mounted nor used.
  $5 + shipping OBO

• Misc Turbo Couplers
  Silicone. All are reinforced. Most are new.
  $5 each + shipping OBO

• T-Bolts Clamps
  Assorted sizes. Range from 1.375" to 3.5" clamps. For radiator hoses, intakes, and turbo couplers.
  SOLD!!

If you have any questions or need different pics, feel free to ask!

My Ebay Feedback: http://myworld.ebay.com/purplemetal1
I sell a lot more on message boards that I do on Ebay, but all of my buyers are 100% satisfied.
Check my Ebay name on Probetalk.com and you'll find the same items for sale if you want to connect the two different usernames.

 

[metallargy]

While I was retaking pictures of the couplers and clamps, I realized I forgot to list the camgears and Autometer gauges.

Here's the rest of the pictures:

 

[nate0123]

links are fine but if you want to attach the photos you can attach another 5 to your second post

it's a 5 photo limit per post

 

[metallargy]

links are fine but if you want to attach the photos you can attach another 5 to your second post

it's a 5 photo limit per post

Doah! I feel stupid for not realizing that.
And I've seen quite a few threads with the first 3 posts of nothing but attached pictures.

Guess I was too concerned with having everything together. Thanks, dude!

 

[metallargy]

Marked items sold!

I'm actually surprised there's been no bites on the valve cover.
I remember trying to find one like that on here a few times, but they disappeared very quickly.
Dropped the price on it.

 

[nate0123]

try Forcefed, he buys VCs sometimes... not sure what he normally pays

 

[big Lou]

You have any 2.25 T-bolts?

 

[metallargy]

try Forcefed, he buys VCs sometimes... not sure what he normally pays

Thanks. BTW, you're quite a helpful moderator.
Quite a relief since so many are screaming "BAN!!", but I'm probably used to PT. Lol.

You have any 2.25 T-bolts?

Yessir, I do.
I'll get a count and sizes when I get home later.

 

[big Lou]

I need six please and price shipped to 89183.
Thanks Lou

 

[metallargy]

I need six please and price shipped to 89183.
Thanks Lou

PMed you.


BTW, I corrected the pic for the camgears.
Accidentally loaded the picture for the FS02 gears.

 

[yudkib]

ill take the 30k set of coils, please ship small box USPS flat rate priority ASAP and PM me your paypal.

 

[AzteCypher]

PM Sent

 

[igdrasil]

I'm looking for the ignition coils shipped to 00902.

Thanx

 

[yudkib]

i have dibs on the coils, and he hasnt responded to any form of contact ive tried to make with him.

 

[igdrasil]

i have dibs on the coils, and he hasnt responded to any form of contact ive tried to make with him.

good to know, thanks.

 

[Crazee D]

hmm where did the vc go?

 

[metallargy]

Wow ... I thought this thread died off. Haven't gotten any notifications whatsoever.
Sorry about that.

PMing and getting shipping quotes now.

 

[metallargy]

ill take the 30k set of coils, please ship small box USPS flat rate priority ASAP and PM me your paypal.

They barely fit in there so there's no room for padding, but if that's ok with you I'll PM you my Paypal address.

Still interested?

i have dibs on the coils, and he hasnt responded to any form of contact ive tried to make with him.

All I see is your post in this thread.
I see no PMs (from you, anyway), nor email contacts.
Something I missed?

 

[metallargy]

I'm looking for the ignition coils shipped to 00902.

Thanx

PMed you.

hmm where did the vc go?

Sold it. (headbang)

 

[yudkib]

All I see is your post in this thread.
I see no PMs (from you, anyway), nor email contacts.
Something I missed?

haha i did send a PM a few days after the first time i posted (edit: no i didnt upon further review) - and an email too i think. maybe i sent it to the wrong address.

in any case - ill still take the 30k set, im not in as much of a rush so if you want to go USPS first class and have a little more room to work with thats fine with me. PM me your paypal with a total to 06062