fmic~

[MSpeed2397]

There's also a few other kits with the ICs that aren't as tall in case you don't want to cut the bumper all up.

 

[tolagarFriS]

Yeh I was looking around at all the different choices....what would be the ideal dimensions?

I would want the biggest I could get without having to cut the bumper all up. I mean, a few tiny cuts are ok I guess....but I don't really want to cut metal, or be able to see the cuts from the outside.

 

[blazinrola80]

what size is your core? LxWxH. im going to buy my kit as soon as you give me the info wat size piping is that 2.25 or 2.5?

 

[MSpeed2397]

That's some 2.5" piping, but the core on that one is huge...I believe it's 11" tall 28" wide 3" thick if I'm not mistaken.

 

[MSP_4_CODY]

no its like 7/3/28

 

[MSP_4_CODY]

hey cody how long did it take you total?

about 7 hours but i had to run and get more couplers and stuff

 

[tolagarFriS]

Auction Number: 260046140103

Hmmm?

 

[MSP_4_CODY]

?

 

[Brian MP5T]

Sub

 

[Smork]

just got mine in, gonna try to go this week and get a new BOV, and have the flange welded on. Gonna go buy a few more couplers, and have a field day putting this on, while I replace all my vac lines etc.

 

[orng1]

Will it be in by tues? What other BOV are you going to go with now?

 

[Earful]

Pics please of people trying this....

 

[Smork]

I'm not sure. If i can find a bov/flange by then and then a tig welder.. yes hah

 

[CnoTataymo]

did you happen to feel a difference in power? smoother?

 

[Wbriggs19061]

this is the setup im gonna do off ebay..comes out to like $177 just for the piping then i gotta find an intercooler...thats 2" hot piping and 2.5" cold piping..

 

[MSP608]

this is the setup im gonna do off ebay..comes out to like $177 just for the piping then i gotta find an intercooler...thats 2" hot piping and 2.5" cold piping..

that looks like itll never work

 

[MSpeed2397]

Lots of cutting, lots of couplers and you can do anything

 

[Wbriggs19061]

that looks like itll never work

that is only a half ass pic of the kit..u actually get to pick all ur bends and couplers..but after i get it all put together with couplers im gonna find a shop to weld most of it together..so i wont have to many couplers..

 

[03.5silvermsp]

MSP 4 cody-very nice. i'm probaby going to buy the entire kit with piping, bov, and intercooler etc. Could you post up or send me a pic of the top view? I just want to see how everything is routed. Thanks man

 

[03.5silvermsp]

well i bit the bullet, bought a kit (auction #: 290049303744)with a 22x5.5x2.5 core(so there will be minimal hacking) with piping and bov. i also ordered an extra piping kit(auction #: 290049472994) because i plan to make a short ram intake and will make my maf blow thru. I'll start my own thread when everything comes in and i get started. Any more info you can provide would be great guys.