Feeler Thread: Forge dual-piston BOV
- Thread starter Black Majik MSP
- Start date
ok we used a pair of pliers and ended up just slipping it off...
This BOV looks/feels great. It is the only performance mod i have on my otherwise stock car and its effect is extremely noticeable. It feels like quicker and more uniform throttle response. Also it sounds great, even w/ the stock airbox. Strictly whoosh sounds from this MSP! Great product and fast shipping, couldn't ask for more!
-jon
This BOV looks/feels great. It is the only performance mod i have on my otherwise stock car and its effect is extremely noticeable. It feels like quicker and more uniform throttle response. Also it sounds great, even w/ the stock airbox. Strictly whoosh sounds from this MSP! Great product and fast shipping, couldn't ask for more!
-jon
Yeah we just used some pliars and were careful to twist it off..it popped right off. Install went well and after driving my buddy jons car(goku) with it on there I noticed a huge diff over my stock MSP...I am def interested in buying this now...
^^ Yeah what he said haha^^
^^ Yeah what he said haha^^
- :
- 2003.5 Titanium Gray MSP #1699
Awesome...glad to hear you all are loving these!
I just used a different vaccum line.
Did any of you cut your stock pipe that you put the plug in? I didn't want to so I had to force the BOV to sit on top of it, just incase I ever have to switch back to the stocker.
And for all the people wondering if you need a bracket; you don't. It seems perfectly fine hanging there, although mine is sitting on top of the plug. If that's confusing, you'll be able to see in my pics, but my cousin is in bed so I can't get them hosted right now.
Did any of you cut your stock pipe that you put the plug in? I didn't want to so I had to force the BOV to sit on top of it, just incase I ever have to switch back to the stocker.
And for all the people wondering if you need a bracket; you don't. It seems perfectly fine hanging there, although mine is sitting on top of the plug. If that's confusing, you'll be able to see in my pics, but my cousin is in bed so I can't get them hosted right now.
spacemonkey
Member
- :
- Mazdaslow
Every thing pops off with alittle TLC! The biggest pain is the BPV hoses...use some twisting action to get it loose and pop it right off. If you dont know use pliers to get the stock clamps off the BPV and you can just tug to get the Wastegate line off.
jrodhotrod
Contributor
- :
- 2003 Mazda Protege5 (Mine) 2002 Nissan Sentra GXE (Wife's)
I can't wait for mine to get here...
Coming from Florida, I imagine that I'll be the last one to get mine. I feel your pain, TheJohnny, us Left Coasters just got a wait a little while on this one.
Coming from Florida, I imagine that I'll be the last one to get mine. I feel your pain, TheJohnny, us Left Coasters just got a wait a little while on this one.
spacemonkey
Member
- :
- Mazdaslow
Make sure your clamps are tight and hooked up properly. My only other advise is to check your spring and make sure its the green spring. Stalling...maybe but you should not be hesitating or jerking. Mine stalls after shifting into Neutral from wide throttle and hard acceleration (at high rpms).
jrodhotrod
Contributor
- :
- 2003 Mazda Protege5 (Mine) 2002 Nissan Sentra GXE (Wife's)
Someday, my BOV is gonna get here.... Heres hoping for tomorrow!
-Jared
-Jared
Got my BOV yesterday and put it on. Having some problems with hesitation, going to try and run a different vacuum line to it and see if that works. I also just installed a new filter on the end of the stock setup like many have done, this works fine when running with stock BPV but when I put on the BOV it's a nightmare. Anyway, going outside right now to mess with it, will let you all know what happens with me, going to take it apart first to make sure I've got the green spring.
- :
- 2003.5 Titanium Gray MSP #1699
Carefully remove the 6 hex screws from the top of the BOV & you'll be looking right at it.goku4658 said:
