erebuni grill fitment on a p5
- Thread starter kiwee
- Start date
for his msp. no difference btwn p5's and msp's though.flat_black
Member
I _think_ you have to remove a tab or somesuch from it, since it's for the JDM version; Aside from that, I've heard little to nothing about it... I actually like the 258GR model grille (the third), as it looks like the grille from the 6s/MPV of the same era. I think it would be a nice, subtle change.
those grills are made for the different front bumpers ---
if you buy one of thier bumpers -- the stock grill will not fit -- so you have to buy a grill to go with the bumper
so your question -- will it fit a US version ----------> NO --- itll fit in the hole but not line up all the way ----
Any ways these statements are from me and me only --- this is just my 2cents on what was interped from the web site ------ enjoy
if you buy one of thier bumpers -- the stock grill will not fit -- so you have to buy a grill to go with the bumper
so your question -- will it fit a US version ----------> NO --- itll fit in the hole but not line up all the way ----
Any ways these statements are from me and me only --- this is just my 2cents on what was interped from the web site ------ enjoy
The top 2 will fit the stock Australian 1.8 model bumper, it won't fit on the US P5. They may fit on your ES models? Sorry I am not sure about your 1.8 cars...
But the bottom one looks to be much the same again, the P5 has a shallower grill height for what these grills were intended, which is the Asian/Australian market I'd say...
Chicaboo.
But the bottom one looks to be much the same again, the P5 has a shallower grill height for what these grills were intended, which is the Asian/Australian market I'd say...
Chicaboo.
Jeff@Tri-Point
Member
I just got the 258gr last week..it doent fit I have a p5 and the bottom part is pointer than the bumber, you need to modify it alot to make it fit. It might fit if you sand it to make it rounder, but i havent tried yet.kiwee said:i am thinking of ordering 1 of the following grills from erebuni. just wondering if there are any issues with fitment on the north american version of the p5 vs. the jdm version?
any help or experience here?
thanks guys!
Grill #123GR
Grill #139GR
Grill #258GR
this is from the web site its self -- i wont say i told you so --- hehehehe -- jk
MAZDA 323 & PROTEGE ACCESSORIES
<CENTER><TABLE cellSpacing=2 cellPadding=2 width=550 border=0><TBODY><TR><TD>
</TD><TD>
</TD><TD>
</TD></TR><TR vAlign=top><TD>Grill #123GR & Eye Brows #123EB</TD><TD>Grill #139GR & Eye Brows #123EB</TD><TD>Grill #258GR </TD></TR></TBODY></TABLE><TABLE><TBODY><TR><TD bgColor=#cccccc>PART NO.</TD><TD bgColor=#cccccc>APPLICATION</TD><TD bgColor=#cccccc>DESCRIPTION</TD><TD bgColor=#cccccc>PRICE</TD><TD bgColor=#cccccc>MTRL</TD><TD bgColor=#cccccc>DOD</TD></TR><TR><TD>123GR</TD><TD>2001-03</TD><TD>Custom Grill</TD><TD>136.00</TD><TD>FG</TD><TD>2</TD></TR><TR><TD>123EB</TD><TD>2001-03</TD><TD>Eye Brows (pair)</TD><TD>71.00</TD><TD>FG</TD><TD>1</TD></TR><TR><TD>139GR</TD><TD>2001-03</TD><TD>Custom Grill</TD><TD>136.00</TD><TD>FG</TD><TD>2</TD></TR><TR><TD>258GR</TD><TD>2001-03</TD><TD>Custom Grill</TD><TD>136.00</TD><TD>FG</TD><TD>2</TD></TR><TR><TD colSpan=6>Note: Part No. 123GR, 139GR & 258GR are made for the Japanese version
Mazda 323 which is different from the US Protege, therefore needs modification
in order to fit the US models. </TD></TR></TBODY></TABLE></CENTER>
MAZDA 323 & PROTEGE ACCESSORIES
<CENTER><TABLE cellSpacing=2 cellPadding=2 width=550 border=0><TBODY><TR><TD>
Mazda 323 which is different from the US Protege, therefore needs modification
in order to fit the US models. </TD></TR></TBODY></TABLE></CENTER>
spotthedogg
Member
- :
- 2002 Mazda Pro5
Proparts, did you attempt to fit the 258 grill yet? I want that one also but am concerned how much modification is needed. I am sure I can do the work but would love to have it drop right in. What did you pay?
