CP-e TMIC

boosted1

boosted1

CP-e has a TMIC on sale for $350! It appears to be a high quality piece and comes in a polished finish. Check the link below.

http://www.cp-e.com/product/cp-e™-mzr-23-disi-top-mount-intercooler
tmic-shroud.jpg
 
there was no shipping charge listed online, do you happen to know what it is?
 
whateve it is, your saving a butt load of mula already for a 3.25 polished unit...just my 2 cents.
 
I already have a 3.25 ETS on my MS3, was considering buying this CP-E for my wife's CX-7. I'll call them tomorrow and find out how much shipping charge is. I believe all of these TMIC units will fit the MS3, MS6, and the CX-7. This polished CPE looks way nicer than my ETS looks, so I may even put this polished one on my Mazda and put the ETS on hers since hers goes under the plastic cover whereas on the MS3 its right in the open.
 
Last edited:
what did your shipping charge end up being? Reason I ask is because I have a guy with a used ETS 3 inch who wants $400 shipped for that while this is a 3.25 so I was curious what shipping charge was
 
I got it to pull up now, shipping isn't bad at all. I am curious tho as I havent heard about the CP-E up until now, is it on par with the ETS version as far as build quality, fitment, and performance?

I have a 3.25 ETS on my MS3 and this is for my wife's CX-7. My ETS performs well, I dont think the fitment is the greatest but it works and due to age its not a polished version so my ETS looks a bit rough compared to the CP-E here.

If anyone can chime in that would be good as I am up in the air on which one I should end up getting.
 
Yeah. It's on my list of mods. :) $350 is a ******* STELLAR deal. But don't forget the Corksport @ $299, either. Not to take anything away from CP-E.
 
Corksport at $299? damn! I have been out of the game for a while as I modded my MS3 enough I didnt need to do anything else. Now that the wife has a CX-& she wants the same stuff on it that i have. I had no idea they were making TMIC's so cheap now!

I knwo the Corksport also is not yet available til March now that I looked it up. But would anyone be able to say that the CP-E and Corksport are same on performance as the ETS is???
 
UHATEIT said:
Corksport at $299? damn! I have been out of the game for a while as I modded my MS3 enough I didnt need to do anything else. Now that the wife has a CX-& she wants the same stuff on it that i have. I had no idea they were making TMIC's so cheap now!

I knwo the Corksport also is not yet available til March now that I looked it up. But would anyone be able to say that the CP-E and Corksport are same on performance as the ETS is???
Click to expand...
The build quality is very good. I will take more pics to show.
 
As ugly as I think these things look in the engine bay, this is definately a nice looking one. And for this price I would be all over it if I didn't already order a fmic.
 
dang that's cheap. I already placed my order for the CS piece. a slightly larger core + polished seems worth the $50 to me though. Although the CS has cast endtanks; but I am not sure it matters much in the grand scheme of top mounts? How well does the cp-e fit? I guess it doesn't matter as I'm sticking with the CS piece; the stock shroud fits over it and I'm not into flashy stuff like the cp-e piece ha.
 
I picked mine up locally last Thurs, installed it Friday. Looks great, fitament is great, and car pulls like a beast!
 
I too was thinking about the Corksport one as it is cheaper, tho online it doesnt say what the thickness is nor shipping charge. So I called Corksport and they said it's probably going to be 3-inch as opposed to 3.25 like the CPE is supposed to be. I like that you can order it without the shroud to save $25 with CS. I called CPE to ask if they an do it without the shroud like CS for less and they said they wouldnt, it was all or nothing for the $350.

I had no idea you could use the stock cover with these things! I gave mine away a long time ago and would have loved to have used the stock cover
 
sick_role said:
dang that's cheap. I already placed my order for the CS piece. a slightly larger core + polished seems worth the $50 to me though. Although the CS has cast endtanks; but I am not sure it matters much in the grand scheme of top mounts? How well does the cp-e fit? I guess it doesn't matter as I'm sticking with the CS piece; the stock shroud fits over it and I'm not into flashy stuff like the cp-e piece ha.
Click to expand...
The CP-e has cast end tanks also.
 
So those of you that have it, how about some pics with it installed...I curious to know how it compares to ETS
 
I ordered this last week. price was just too good to pass up. I'm on the pre-order for the CS piece as well. Come March, I'll have one for sale...ha.
 
Please log in or register to reply here.

New Posts

S
2016 CX-5 Rear hatch will not lock
Replies
9
Views
251
GrampaSlade
G
L
New 2024 CX-90 PHEV is officially a lemon. Researching what to do next
Replies
18
Views
2K
scaleautoworks
scaleautoworks
T
    • Wow
  • Sticky
What have you done to your P5 today?
2894 2895 2896
Replies
58K
Views
6M
03protege5
0
Antoine
  • Article Article
Mazda CX-70/CX-90 ready for Primetime?
Replies
2
Views
360
taran1900
T
B
CX-5 Strut Brands
Replies
3
Views
190
Bitterlemon
B
sm1ke
    • Like
  • Sticky
What have you done to your CX-9 today?
73 74 75
Replies
1K
Views
463K
Bronco Boy
Bronco Boy
View more…

New Threads

Back