First off, that intake was not made specifically for an MS3. If you ask me, I would not have just put any intake on this beautiful car of ours. But hey, to each his own. Check the MAF wiring harness and make sure they have slack so when you do punch it or have some fun it has enough to move with the engine.
just came back from Autozone. The scan said "link error" but it probably reset the computer cuz now the check engine light is off. btw, is it worth it to invest in one of these scanner?
link error??that sounds like it didn't even get connected to the computer??i have a scanner for me its a good investment cause i turn wrenches for a living but i would say it would be nice to have a basic one if your gonna be toying with your car from time to time
link error??that sounds like it didn't even get connected to the computer??i have a scanner for me its a good investment cause i turn wrenches for a living but i would say it would be nice to have a basic one if your gonna be toying with your car from time to time
that might of been the problem, but ive been to autozone for a code i kept throwing when i had my blow off valve set to vta, because it always happend when my tools were locked up at the shop, but the one i used at autozone worked just fine on my speed3, but some autozones aren't as up to date as others, but i think you should be fine as long as its OBD2
that might of been the problem, but ive been to autozone for a code i kept throwing when i had my blow off valve set to vta, because it always happend when my tools were locked up at the shop, but the one i used at autozone worked just fine on my speed3, but some autozones aren't as up to date as others, but i think you should be fine as long as its OBD2
hey guys maybe somebody in here can answer my question....installed some gauges yesterday an unplugged the airbag light near the ashtray to remove the panel. Now the airbag light is on (i did plug it back in and push it behind the panel). Now can autozone or an obdII scanner get ride of this? or do i need to take it to mazda?
hey guys maybe somebody in here can answer my question....installed some gauges yesterday an unplugged the airbag light near the ashtray to remove the panel. Now the airbag light is on (i did plug it back in and push it behind the panel). Now can autozone or an obdII scanner get ride of this? or do i need to take it to mazda?
Dont quote me on this but i think the airbag code is going to be a "hard code" and mazda might have to do it with there computer, or what i would do is take it to autozone and see if there scanner will work. but the problem is that its not really a engine code and most those scanners are made for check engine lights, so just bring it to autozone first to make sure, before you have to bring it to the dealer, thats what i would do.
hey guys maybe somebody in here can answer my question....installed some gauges yesterday an unplugged the airbag light near the ashtray to remove the panel. Now the airbag light is on (i did plug it back in and push it behind the panel). Now can autozone or an obdII scanner get ride of this? or do i need to take it to mazda?
