Bikingpro5 supercharged Protege5

Status
Not open for further replies.
I accept full responsibly and will be more than willing to cast the blame onto my parents in regards to my upbringing
 
Well finally good news i figured out what part of the wiring was wrong for the AEM FIC and the cars now runs with it plugged in, i have one CEL for P0102 that i need to figure out. Least now i can tuck all the wiring back into the car and get all the pieces installed, 440s and perrin rail will be installed before the car gets tuned.

IMG-20120619-00567.jpg


IMG-20120619-00569.jpg


huge thanks to Big Lou, and Flipottawa for all the help figuring out what few wires might have been messed up.
 
Great vid glad you figured it out!! What was the wiring issue?

Crank A9 pin was not seated properly in the AEM harness, and I had a different wire in the ECU for one of the sensors. Change the wire and fixed the pin and it started with the AEM plugged in.

Thanks again for sending me the proper sensor wiring.
 
Status
Not open for further replies.
Back