Aluminium Intercooler Pipe Kit - DIY FMIC inside

[Captain KRM P5]

i used three coats on your pipes honestly, and its the same stuff that is used to resurface repaired alloy wheels, so it should take punishment. i'm sorry if they don't look right in some fashion.

you will be getting both the bracket and a black silicone hose for the recirc.

 

[Bonafide_Spd3]

When will this be?

 

[timv]

How long after the pipes and core arrived did others receive the couplers?
I got my pipes and core on thursday but haven't received the couplers yet...
Thanks....

 

[Bonafide_Spd3]

I got my couplers 3 days before

 

[timv]

Hmmmm.... i guess mine should be here soon then???

 

[Captain KRM P5]

yes, all the couplers and tbolts ship for me from a company in colorado, not from me.

 

[timv]

hmmm... can you make sure my couplers shipped then?
Thanks...

yes, all the couplers and tbolts ship for me from a company in colorado, not from me.

 

[Wholemilk]

I'm sure by now everyone has seen the car torn apart with the FMIC and the pipping and all that so I'm just going to post up the sweet shots. i have a blackberry tour as a camera so please excuse the professional quality it provides

I especially wanted to take this picture because of Grand Turismo 3. everytime I go into the garage it shows the selected car with the garage door about 1/2 closed showing only the front end. I did this purely for the idea that GT3 had. I wish I had a real camera though.

The green super mario mushroom was put on by yours truely Ken from PG! Thanks Ken for tailoring to my weird needs!

 

[Captain KRM P5]

i was waiting for this picture. glad to see you liked the 1up. i hope it holds up to the brutal forces of the street.

 

[TheDoc]

lol 1UP mushroom is pure win.

 

[Wholemilk]

hahaha i hope so too! i might put the plastic mesh back on later but i just had to show it off right now so i took it off did you get my msg? i am still missing the elbow but i went out and bought a radiator hose with a 90 degree bend so i ended up just putting a whole new hose there. the old hose i had i cut up and hacked up to the point of no return but i perfer the hose i bought because the inner diameter doesnt shrink like it would with the elbow. the car runs strong!

 

[BoostedSpd6]

that 1 up mushroom is Awesome!!

 

[jay32m]

Where did you get the hose wholemilk? Can you take a pic of it?

 

[hnda etr]

Ken, left you voicemail... gimme a call...

 

[Wholemilk]

I dunno the part number but i went to a place called Pep Boys, I cant say they were very peppy but that matters not. the hose I bought was sort of 45 degree or a wide 90 degree turn. they let me choose which pipes too. i asked for a pipe with a 90 degree bend and inner diameter to be 1 1/4 inches. my friend with the same car got a sharper 90 degree bend. i had to chop up the hose because all i needed was the straight and 90 degree piece. so if your looking for a hose like mine you'll have to just cut it up, theres no other way to buy just a straight piece with a 90 bend in those stores. the measurements were 9inches in length and 4 inches after the bend. you wont need 9 inches or 4 inches but i made those measurements for cutting purposes. the more to cut the safer it is i got the hose for $12

 

[Captain KRM P5]

not a bad looking solution

 

[timv]

Still no couplers for me......
Ken, can you check on these?
Thanks.

 

[hnda etr]

Still waiting for call back Ken...

 

[Captain KRM P5]

Still waiting for call back Ken...

PM sent

 

[hnda etr]

PM sent

Replied