2019 CX-5 AWD Jacking Points?

Anyone know where the front and rear jacking points are? Photos?

I’m planning on installing an Autoexe Lower Arm Brace (Rear). Also, my car has a hitch.
 
Here are some jack pads that I have found and may help you guys. I've been using #1 for the past 2 - 3 weeks and I haven't had much issues with it. I have the HF Daytona 3 ton jack (square jack pad) and it fits perfectly. As for long term usage and reliability, I can't comment on that but I think #3 & #4 would be the most durable based on the beefiness and size of it. I was about to purchase either one if #1 didn't work out.
  1. Looks like they sold out of the individual pads: https://www.amazon.com/dp/ (commissions earned)
  2. https://www.amazon.com/dp/ (commissions earned)
  3. https://www.amazon.com/dp/ (commissions earned)
  4. https://www.amazon.com/dp/ (commissions earned)
 
Upvote 0
Most homeowners will have scrap lumber of some sort laying around. Folks who live in an apartment, or similar, may not.
But they have hockey pucks and a jack? I'm just saying that if you bought yourself a jack, go thru the extra effort to get the right attachment to use it safely. I've done some questionable auto repairs and would never think to put a hockey puck or some unfamiliar material between the jack and the car.

That video must have been made with the expectation that it would fail.
 
Upvote 0
Why do people use hockey pucks? Are they more accessible than a piece of 2x4? I never had a problem with wood when I needed a spacer, plus it's soft enough that the jack bites into it and doesn't allow it to slip. A hard slippery puck seems like a bad idea...
Agreed. I always use a piece of 2X4 or 2X8 to space between the jack and the jack point, mainly want to protect the metal and / or paint of the jack point. Like DwightFrye, one of these days I'll upgrade it to a thick rubber jack pad for the jack cradle.

Yes, use the "odd looking jack point extension". I've done this many times and it worked perfectly. I used a scrap piece of 2x4 on the floor jack cradle in the past and it works fine. I now have a thick rubber jack pad for the jack cradle but the 2x4 will be fine.

https://www.amazon.com/dp/ (commissions earned)
 
Upvote 0
This is the jack pad that I use. It works good for my jack. For the front jack point I put a hockey puck on top of it.
https://www.amazon.com/dp/ (commissions earned)


When you use those rubber pads for the stands, supposedly ONLY the top of the jack head rubber pads contact the vehicle's underbody w/o the RAIL contacting the bottom of the groove!

It is very important that the RAIL DOES NOT CARRY THE LOAD!

It is stated on the 2nd gen of the owners manual page 7-8 and it should apply to all vehicles with this type of STAMPED JACKING POINTS. Exception is if they are reinforced like in my 08 civic.
 
Last edited:
Upvote 0
A hockey puck fits perfectly on the front jack point, it clears the plastic undercover and goes right on the dimpled strengthened metal. The rear I put the jack under the protruding metal thing that is bolted to the differential.

View attachment 297034
So this is the 2018 cx-5?

Also what about the rear? Some said the rear diff extension part that hangs down and others say between the two bolt holes?
 
Upvote 0
When you use those rubber pads for the stands, supposedly ONLY the top of the jack head rubber pads contact the vehicle's underbody w/o the RAIL contacting the bottom of the groove!

It is very important that the RAIL DOES NOT CARRY THE LOAD!

It is stated on the 2nd gen of the owners manual page 7-8 and it should apply to all vehicles with this type of STAMPED JACKING POINTS. Exception is if they are reinforced like in my 08 civic.

I made pictures that shows that the pads only get the weight from the pinch welds.

PadA.jpg

PadB.jpg

PadC.jpg

PadD.jpg
 
Upvote 0
About jack stands, I didn't like my harbor freight jack stand build so I got a refund and I got Walmart Black Jack stands that are made well, with one exception. I purchased another set of Black Jack stands later, and they were made lousy just like the Harbor Freight ones were made, the lever didn't have enough angle when locked. I brought them back.
If going under the car, I use two redundant things that the car would fall on if the jack stands failed. More jack stands and a stack of wood. Normally I only use the jack stands to rotate my tiers and I'm not under the car.
 
Upvote 0
Back