2003.5 Custom Fog Light Kit

Status
Not open for further replies.
Kick ass(kiss)





zmzmp5 said:
Everyone,

a) For those of you whom ordered just the brackets, each set has been placed in a padded envelope with 8 screws and labeled with your address's to ship on Monday.

b) ^Tyrant^ - your brackets have been test fitted to the 362W's and have been bent and 1st stage of painting. I will finish the 2nd stage of painting tomorrow and ship on Monday.

c) Kevducrider and II-Savy - your brackets have been test fitted and have been paint and 1st stage of painting. I will finish the 2nd stage of painting tomorrow and ship on Monday.

d) CatD399 - you have a PM.

- Brian
 
zmzmp5 said:
Everyone,

a) For those of you whom ordered just the brackets, each set has been placed in a padded envelope with 8 screws and labeled with your address's to ship on Monday.

b) ^Tyrant^ - your brackets have been test fitted to the 362W's and have been bent and 1st stage of painting. I will finish the 2nd stage of painting tomorrow and ship on Monday.

c) Kevducrider and II-Savy - your brackets have been test fitted and have been paint and 1st stage of painting. I will finish the 2nd stage of painting tomorrow and ship on Monday.

d) CatD399 - you have a PM.


- Brian
a) Been said

b) and c) Second stage of paint process implemented. Will package tomorrow and ship on Monday

d) We've talked.
 
For those of you whom are interested in the NV-607 lights, we are withdrawing our support that the G3 brackets, in a mass production state can support these lights. The reason being is the rear of the light is over 4.25" wide and the inner circle of our G3 brackets are 3.80" diameter-wide. We will recommend the NV-605's that are the same style, though slightly smaller to accomodate our brackets.

Though, I have managed to get two sets of NV-607's to work with the G3 bracket(after a lot of troubleshooting and scrapping of a few G3 sets), I also had to modify these brackets by making slits on either side of each tab on the inner circle by over 1/4" leaving about 2/8" front face exposed (make a slit long enough without cutting the actual outer bracket).

This is where we are at. We apologize for any problems, but continue to strive to provide a quality "universal" product.

- Brian
 
Sweet, you got the correct ones now...do you have extra sets? If so, I can send a payment now. Thanks!
 
nictlg7 said:
Sweet, you got the correct ones now...do you have extra sets? If so, I can send a payment now. Thanks!
Yup, got correct ones now. Yes, I have 14 sets available. Will post pictures very shortly.

- Brian
 
Last edited:
Everybody,

Good morning (it's Sunday)!

All products have been boxed, labeled, and are in the trunk of my car to ship out tomorrow. All orders have been accounted for.

Furthermore, I have updated my web site. Specifically, take a look at newly posted pictures (THERE IS NO GAP! ;) ) and product information at:

http://www.03msp.com/products.htm

- Brian
 
Also, for someone that may be interested...

I have a set of pre-bent and pre-painted black epoxy G3 brackets mounted to a set of used, but in good condition NV-602W fog lights with 100 watt bulb upgrades (including wiring harness) for $85.00 shipped. PM me if interested.

- Brian
 
100watt bulb upgrade......do tell



zmzmp5 said:
Also, for someone that may be interested...

I have a set of pre-bent and pre-painted black epoxy G3 brackets mounted to a set of used, but in good condition NV-602W fog lights with 100 watt bulb upgrades (including wiring harness) for $85.00 shipped. PM me if interested.

- Brian
 
II-Savy said:
100watt bulb upgrade......do tell
I just swapped out the 55 Watt bulbs that Pilot provides with 100 Watt bulbs from Pilot $10.00 + TAX. I figured the housing was all metal and it could handle it. The light ouput is about 150% versus 100% original. Big difference!

II-Savy, you'll love the new brackets, just don't go orgasmic over them! LOL

- Brian
 
zmzmp5 said:
I just swapped out the 55 Watt bulbs that Pilot provides with 100 Watt bulbs from Pilot $10.00 + TAX. I figured the housing was all metal and it could handle it. The light ouput is about 150% versus 100% original. Big difference!

II-Savy, you'll love the new brackets, just don't go orgasmic over them! LOL

- Brian

Well if I do I'll be sure to clean them off before putting them on the car.(wink)
 
zmzmp5 said:
I just swapped out the 55 Watt bulbs that Pilot provides with 100 Watt bulbs from Pilot $10.00 + TAX. I figured the housing was all metal and it could handle it. The light ouput is about 150% versus 100% original. Big difference!

II-Savy, you'll love the new brackets, just don't go orgasmic over them! LOL

- Brian
I looked a bit on the pilot site and could not find them.
 
Brian, Check the G-3 Gauge on your website. I think you made a change. Thanks for the update on the brackets.
367 (mp3yellow
 
zmzmp5 said:
Also, for someone that may be interested...

I have a set of pre-bent and pre-painted black epoxy G3 brackets mounted to a set of used, but in good condition NV-602W fog lights with 100 watt bulb upgrades (including wiring harness) for $85.00 shipped. PM me if interested.

- Brian
I'll take those dude. They are all ready to be installed? The kit is all set to take the place of the fake grilles? I assume that is what you meant by pre-bent. Also, those fog lights are the ones I said I liked, correct...they look more HID superwhite? I realize they don't have the angel eyes, which I actually liked...but they are semi-blue/superwhite in hue, correct? That is the most important aspect of fog lights. If this is the case, let me know, and I can Paypal the money immediately. It is in my balance, so the transfer will be immediate. Thanks!
 
nictlg7 said:
I'll take those dude. They are all ready to be installed? The kit is all set to take the place of the fake grilles? I assume that is what you meant by pre-bent. Also, those fog lights are the ones I said I liked, correct...they look more HID superwhite? I realize they don't have the angel eyes, which I actually liked...but they are semi-blue/superwhite in hue, correct? That is the most important aspect of fog lights. If this is the case, let me know, and I can Paypal the money immediately. It is in my balance, so the transfer will be immediate. Thanks!
Yes, what you have said, preassembled and ready to go.

- Brian
 
Status
Not open for further replies.
Back