2003.5 Custom Fog Light Kit

[www.03msp.com]

you've got money (again)

Received the PayPal. It's an E-check so I have to wait to ship until it clears. That will probably be Monday/Tuesday.

Again, thanks!

- Brian

 

[www.03msp.com]

Hey Brian, guess what happened to me. I took a friggin rock on the driverside lens of my 362w's and it is shattered. Any idea if I can get one light by itself? Or where I can find these in a pair, no harnesses etc.? I was pissed.

Feels good, huh? (just kidding) Now you know how I felt when I did the PIAA 40 lights on my P5 project. I ended up having to buy another set (complete) to replace one and have another as a spare - that's what you will have to do as well - go to AutoZone - $65.00/set.

- Brian

 

[CatD399]

If you find a store in canada let me know (uhm)

Un VITRO PLUS ct de chez toi!!!


-->not worth translating...

 

[www.03msp.com]

Everyone!

www.03msp.com has been registered and should be available by weeks end. We will update all information in this thread/on this board referring to it.

WE ARE NOW OFFICIAL! (as if we weren't before, just our name is tagged)

- Brian

 

[Crock]

Received the PayPal. It's an E-check so I have to wait to ship until it clears. That will probably be Monday/Tuesday.

Again, thanks!

- Brian

Sounds good. I haven't decided on which lights to use yet so there is no need to rush.

 

[Pmpkinhead]

Brian, Are the 4 holes in the same location on the G2 and the G3? If mine were to rot out, would the G3 use the same installation? I may get a B/U set.
367 (mp3yellow

 

[benbike]

Un VITRO PLUS ct de chez toi!!!


-->not worth translating...

Je viens de lire que Kevducridr a un fog de bris.... Je ne sais pas si je vais prendre ces fogs l en fin de compte. Je vais esayer de me trouver des fogs en plastique. J'ai eu des problmes avec mes fogs en vitre sur ma Proteg5.

 

[CatD399]

Je viens de lire que Kevducridr a un fog de bris.... Je ne sais pas si je vais prendre ces fogs l en fin de compte. Je vais esayer de me trouver des fogs en plastique. J'ai eu des problmes avec mes fogs en vitre sur ma Proteg5.

Translation: ''I just read that Kevducridr has a broken fog. I don't know if i'll take these fogs after all. I'll try finding plastic fogs. I had problems with my glass fogs on my P5''
end translation

Guess where mine broke: in the box at the dealer's place!!! He's ordering new ones! HA!

 

[Captain KRM P5]

in regards to the complete foglight kit with these brackets, Protege Garage will take $10 off the first ten orders and an additional $10 off if bought in combination with any other item in the store.

 

[noclue119]

Yo i tried to send you the money and my pay pal account said invalid receiver account. wtf I just clicked on the link. hmmm I'll try again tomorrow.

 

[www.03msp.com]

Yo i tried to send you the money and my pay pal account said invalid receiver account. wtf I just clicked on the link. hmmm I'll try again tomorrow.

Hmmm, we are in process of migrating sites - I just updated the link in my signature (sorry)... We should be www.03msp.com in a matter of hours...

- Brian

 

[Newf]

I'm still stuck as to what to do.

Here's why......wasn't going to post this but f it.

I'll admit, I'm a bit indecisive about which lights to get. But that's not the reason why I've held off.

Me and the woman, have a home, car bla bla.....Her company has just gone through a major change, and we aren't really sure how it's going to work out for her yet. We can't really rely on her job right now. On top of that, I have an apartment in my house that I rent out to help with the mortage.....my tenants are now moving end of march and this is a very very hard time of year to get new tenants right away.

But, the big whammy is me. My salary is the biggest one, an get this....my company is about 3 weeks shy of going on one of the biggest srikes ever. We are government based, and to make a long story short, the government is trying to make a lot of cutbacks, and since I'm in a Union.......I may be on strike whether I like it or not. I've been down this road before. When on strike I get NOTHING for income. Without my income I'm screwed. This is how a couple of years ago I went from a nice new 97 Prelude to no car at all, then to a Civic dx hatch

I dont want to miss getting a nice set of lights, but I don't know if I need every cent I got right now for what could be a few weeks or month of no work, no rental income....see my point?

I don't know wtf to do .

 

[www.03msp.com]

I'm still stuck as to what to do.

Here's why......wasn't going to post this but f it.

I'll admit, I'm a bit indecisive about which lights to get. But that's not the reason why I've held off.

Me and the woman, have a home, car bla bla.....Her company has just gone through a major change, and we aren't really sure how it's going to work out for her yet. We can't really rely on her job right now. On top of that, I have an apartment in my house that I rent out to help with the mortage.....my tenants are now moving end of march and this is a very very hard time of year to get new tenants right away.

But, the big whammy is me. My salary is the biggest one, an get this....my company is about 3 weeks shy of going on one of the biggest srikes ever. We are government based, and to make a long story short, the government is trying to make a lot of cutbacks, and since I'm in a Union.......I may be on strike whether I like it or not. I've been down this road before. When on strike I get NOTHING for income. Without my income I'm screwed. This is how a couple of years ago I went from a nice new 97 Prelude to no car at all, then to a Civic dx hatch

I dont want to miss getting a nice set of lights, but I don't know if I need every cent I got right now for what could be a few weeks or month of no work, no rental income....see my point?

I don't know wtf to do .

We all have our ups and downs, and I have been in many situations worse than you. The G3's will always be here. The lights cost more than the brackets. I would save your money for food. It sounds like you are lucky regarding not having kids - such as I (3 girls) in a situation like this. Take it easy - be a party to people out here, and when your fortune is better then you can take advantage of the situation. BTW - what type of job do you have?

- Brian

 

[www.03msp.com]

UPDATE: Owner called me, apologized, gave me a full believable story, they are backlogged due to a new laser going in and the company that did that laser decomissioned the old one. They are about 50 jobs behind, though they are going to attempt to see if they can do it today, and if not tomorrow, with the understanding that I need it shipped out today/tomorrow latest and furthermore receive it Saturday to ship on Monday. I told them in a business-like, serious matter that I have many customers waiting on the product, and since we are at it, INCREASE the order - so I did. See my edited Email below:

XXX/XXX/XXX/XXX,

XXX - Per our conversation that we just had a few minutes ago, please see the attached 03MSPG3SCALE1.dxf file. I have added a dimension of the inner circle for you. In addition, the cuts should be made in 14 gauge. Furthermore, this product is selling like hotcakes! Per our discussion, I would like to INCREASE the order from 40 pieces to " 60 pieces ". Also, I would like to receive these Friday (tomorrow) if at all possible. If it is not possible and you cut/ship them out tomorrow (Friday), PLEASE LIST SATURDAY DELIVERY (residential). Please let me know by the end of today what the status is via a call or Email and provide a tracking number as well.

THANK YOU!

 

[www.03msp.com]

PRE-ORDER a set of G3 BRACKETS TODAY for $40.00 and get $10.00 OFF SAVINGS!

GOOD THROUGH 5:00PM CST, THURSDAY, FEBRUARY 26TH, 2004

CLICK HERE TO ORDER: http://www.your-site.com/~msp03/g3promo.htmhttp://www.your-site.com/~msp03/g3promo.htm

EXTENDED UNTIL:

5:00PM CST, FRIDAY, FEBRUARY 27TH, 2004

 

[Newf]

I'm a Lan admin/I.T. Nerd

And jobs around here are very hard to get in that field.

 

[noclue119]

I'm a Lan admin/I.T. Nerd

And jobs around here are very hard to get in that field.

Are you kidding me Lad Admins are not hard to find. Move to the US.

Ok i'll try to resend the money tonight.

 

[www.03msp.com]

Update:

60 Pieces Being Cut As I Write this...

 

[www.03msp.com]

Update:

60 Pieces Being Cut As I Write this...

UPDATE:

BEING SHIPPED AS I WRITE THIS...

 

[www.03msp.com]

Also, updated web site.