Rotated the tires and while I had them off of the car I washed and waxed the wheels on both sides. I bought the car used last fall and this is the first time that I've done the tire rotation.
Easy enough. I drove the MX up onto the homemade ramps so that I could get my floor jack under the front end. Jacked the front end up (using the crossmember in the middle) just enough to get my jack stands placed (used the rubber pinch weld adapters on my stands for the first time, worked perfectly). Pulled the front wheels off, washed and waxed. Then I jacked the rear up, using the jack point in front of the diff. Pulled the rear wheels off and replaced them with the fronts, crossed over of course. Lowered the rear and then worked on the other two wheels. Placed 'em on the front once done and took it for a ride.
A four beer job well done. Don't fret, that was four beers spread over at least two hours. I took my time.