how is the low beam pattern on them compared to stock, I see these fitted all too often and they just glare and generally "throw" the light out at all angles.I bought a set of H11 LED bulbs from AUXITO. I installed them for my mazda CX-3.
View attachment 310666
Before
View attachment 310667
After
View attachment 310668
Every night, the driving experience becomes great.
The low beam works great, I mean Definitely much better than halogen. You need to install them correctly to avoid glarehow is the low beam pattern on them compared to stock, I see these fitted all too often and they just glare and generally "throw" the light out at all angles.
Looks like high beams here. right about that second white line there is a defined cutoff where the beam starts from the HB. What I am looking for is a pic of the car facing a light colored wall parked about 30ft away with only low beams on. That will show the cut off if one is even left lol. that is really the only acceptable demonstration for low beam performance in the glare category. Rolling night shots are neigh on impossible to properly convey as the night performance of cameras (esp cell cams) varies with settings and actual camera sensor quality. I am really picky with these retrofits and love to tear them apart if they glare. Driving a semi truck 100k miles a year I see my share of idiots with crap lights in them. while I am here, I saw mentioned about the P5 getting a best headlight category in a magazine in it's day. IMO there were others that I have had that had way better light control over the low and high beams but I may have mis read that post or have incomplete information lolI have to disagree, the light output looks bright, but it's pretty clear from this picture that the glare for other drivers is horrible:
Yep, they're hign beams. I have no leisure taking a picture of the car facing a light colored wall parked about 30ft away with only low beams on.I prefer to judge the quality of the product in the review on the website. IMO LED bulbs on the market are either too expensive or of poor quality. At least these bulbs made a good impression on me.Looks like high beams here. right about that second white line there is a defined cutoff where the beam starts from the HB. What I am looking for is a pic of the car facing a light colored wall parked about 30ft away with only low beams on. That will show the cut off if one is even left lol. that is really the only acceptable demonstration for low beam performance in the glare category. Rolling night shots are neigh on impossible to properly convey as the night performance of cameras (esp cell cams) varies with settings and actual camera sensor quality. I am really picky with these retrofits and love to tear them apart if they glare. Driving a semi truck 100k miles a year I see my share of idiots with crap lights in them. while I am here, I saw mentioned about the P5 getting a best headlight category in a magazine in it's day. IMO there were others that I have had that had way better light control over the low and high beams but I may have mis read that post or have incomplete information lol
Can I switch my PG5 to LED and use current headlight housing? I wonder if I need to do more than just bulb replacement, does it mess things up with fuses etc? My light bulbs dont last more than a year now, not sure why.I bought a set of H11 LED bulbs from AUXITO. I installed them for my mazda CX-3.
View attachment 310666
Before
View attachment 310730
After
View attachment 310731
Every night, the driving experience becomes great.