Where did you find pistons and rods for $800?
What have you done to your MSP today?
- Thread starter baconbitz
- Start date
Figures lol.
That's not so bad. $2000 ish to dummy proof the engine for a dd. I gave out $950 like 7 months ago and still don't have parts heh.
Meh I don't keep the msp cause its particularly good. Its unique and grabs attention. And the more kids wrap em aroubd poles or give up on em, the rarer mine gets lol
Meh I don't keep the msp cause its particularly good. Its unique and grabs attention. And the more kids wrap em aroubd poles or give up on em, the rarer mine gets lol
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
Considering what the MSP is worth these days I will probably keep mine forever as well. Even clean FC RX-7s don't have much value and they are starting to have a bit of a renaissance.
There is prestige in having to say all your shyte has to be custom made. when a honda kid goes off about his $200 cams and your all like b****! Please! $800 Each lol.
Meh. I like how it looks and how it drives. All mine needs is a little refresh and it'll last another 133k plus. Np
Ps. Pope might have died or something. Tough to get a hold of seemingly.
Meh. I like how it looks and how it drives. All mine needs is a little refresh and it'll last another 133k plus. Np
Ps. Pope might have died or something. Tough to get a hold of seemingly.
- :
- 2003 Mazdaspeed Protege 1660, 2004 Winning Blue RX8, 2005 Mazda6
Yeah, same thing happened to me when I bought a transmission from him. Had to get Evil Monkey to threaten to ban him and list him as a scammer if he didn't send the trans or refund my money. It was 4 weeks without communication. No contact after that to me either. I simply got a refund. No sorry. Nothing.
I might have my steedspeed v2 stock replacement manifold or mam stock replacement manifold up for sale in a few weeks so keep an eye out. And yes I own both
That doesn't help the fact I have $950 tied up for the other manifold and downpipe that's wayway past paypal resolution =\ I should have just taken that $950 DROVE to steed speed and made him dig up the jigs and stuff lol.
Wow I honestly always got a good vibe from pope I hope he reappears soon.
I dont wanna start anything cause im not really upset or anything and that would be unclassy. I just wanna know whats going on, im sure the others who bought in do.
this weekend ill try to give my msp a good was and wax so she is stored in good condition.. prob wont take it apart until i get the new dif and corksport 80mm exhaust at minimum. those two will be needed to keep my transmission from grenading, and actually install the pope stuff when i finally get it.
my wifes 2003 es will get a few goodies from the msp. my eibach sportline springs will go on a set of new kybs for it and she will get the racing beat exhaust. ill also fix the duct taped stock intake on it using parts from my fmic.
I was happy with the custom technowelded hardpipes but they will get replaced when the car goes back on the road with a more purpose built setup.
my goals aren't high hp or speeds. I just want to get rid of all the little sounds the msp makes that makes it seem like a sh*tbox at times.. i just want it to be nice to drive.
in the mean time my mx3 is gonna get some exhaust work, lowering springs and a set of rims from usedeverywhere likely. overall im really happy with it. everything works and it runs great for $500. once i paint the front bumper from my 92 to match the 94, it wont look like a pos anymore =)
gonna pull the heads back off the 92 tonight/tomorrow before loading it on a truck. then when my 94 starts to smoke, ill just swap in the newly rebuilt heads.
this weekend ill try to give my msp a good was and wax so she is stored in good condition.. prob wont take it apart until i get the new dif and corksport 80mm exhaust at minimum. those two will be needed to keep my transmission from grenading, and actually install the pope stuff when i finally get it.
my wifes 2003 es will get a few goodies from the msp. my eibach sportline springs will go on a set of new kybs for it and she will get the racing beat exhaust. ill also fix the duct taped stock intake on it using parts from my fmic.
I was happy with the custom technowelded hardpipes but they will get replaced when the car goes back on the road with a more purpose built setup.
my goals aren't high hp or speeds. I just want to get rid of all the little sounds the msp makes that makes it seem like a sh*tbox at times.. i just want it to be nice to drive.
in the mean time my mx3 is gonna get some exhaust work, lowering springs and a set of rims from usedeverywhere likely. overall im really happy with it. everything works and it runs great for $500. once i paint the front bumper from my 92 to match the 94, it wont look like a pos anymore =)
gonna pull the heads back off the 92 tonight/tomorrow before loading it on a truck. then when my 94 starts to smoke, ill just swap in the newly rebuilt heads.
Hey guys, I got one for you.. A question, that is.
I pulled out my manual boost controller to see if it would help my over boost problem. And the biggest difference is I now have the damn turkey again!!
It's odd I know ( compliments of original owner ) but I don't understand how a a tiny section of tube and a lil MBC (which is turned all the way out) could make a difference to my by-pass system.
Anyone got any ideas why??
Relevant info:
hard pipes with 1' bypass fittings
1" boost sciences BPV
Gutted exhaust
Before (W/ MBC)
spikes to 10 or 11 psi holds at 8 psi
No turkey, instant bypass
After (Without)
no spike holds 8 psi
noticeable compression surge
ANY insight would be much appreciated!
I pulled out my manual boost controller to see if it would help my over boost problem. And the biggest difference is I now have the damn turkey again!!
It's odd I know ( compliments of original owner ) but I don't understand how a a tiny section of tube and a lil MBC (which is turned all the way out) could make a difference to my by-pass system.
Anyone got any ideas why??
Relevant info:
hard pipes with 1' bypass fittings
1" boost sciences BPV
Gutted exhaust
Before (W/ MBC)
spikes to 10 or 11 psi holds at 8 psi
No turkey, instant bypass
After (Without)
no spike holds 8 psi
noticeable compression surge
ANY insight would be much appreciated!
Damn I wish mine had 65 K
I agree 100%. Mine's still BONE stock with under 65k on the clock.
- :
- 2003 Mazdaspeed Protege 1660, 2004 Winning Blue RX8, 2005 Mazda6
I hate you. Spun another GT25 to death. Can only imagine spinning them to 20+psi is having an adverse effect on their lifespan. Noticed it only boosting to 18psi, then 15psi, then after boosting, I'd get a plume of smoke. Pulled off the road and disconnected my charge piping so I could make it home without sucking impellers into the engine and blowing smoke for 45 miles. The last one went out going to the same place. Weird. Well, finally going to get a GT28 I guess. That's the silver lining I suppose.
