The Ohio Random Thread... aka We Should Probably Be Working

tumblr_m99q0hKr8P1qknseao1_500.png
 
well I can't compete with 1 with a lot of zeros they are the SPC camber arms. so I dont think so... correct if I'm worng
 
Wait. The camber arms mentioned above.... Are those THEE camber arms by street unit/SURE? That break?

I thought they pulled them off the market because of all the breaking and bad customer service that followed.
 
I thought they pulled them off the market because of all the breaking and bad customer service that followed.

I heard that's not the only SURE part that was breaking (along with the bad customer service). I think I saw a big announcement on the Mazdaspeed forums telling people to stay away from SURE. I used my $50 SURE gift card from Mid-Ohio last year on some boost tubes. I guess it's harder for boost tubes to fail lol.
 
I heard that's not the only SURE part that was breaking (along with the bad customer service). I think I saw a big announcement on the Mazdaspeed forums telling people to stay away from SURE. I used my $50 SURE gift card from Mid-Ohio last year on some boost tubes. I guess it's harder for boost tubes to fail lol.

Ask sho how his boost tubes are holding up. He is using my stock boost tubes now because the SURE ones were almost a 1/2 inch to short and pulling off the throttle body. Idk about the hot side though
 
Ask sho how his boost tubes are holding up. He is using my stock boost tubes now because the SURE ones were almost a 1/2 inch to short and pulling off the throttle body. Idk about the hot side though

I thought his issue was broken tabs on the TMIC causing it to move too much? Hopefully they're not too short, I haven't opened them or installed them yet.
 
I thought his issue was broken tabs on the TMIC causing it to move too much? Hopefully they're not too short, I haven't opened them or installed them yet.

The cold side was 1/2 inch shorter than my stock tube. Yes the broken tabs probably what really pulled it off the throttle body but none the less it was still shorter than it should be. The hot side off the turbo didn't look different at all but we didn't really measure it.
 
The cold side was 1/2 inch shorter than my stock tube. Yes the broken tabs probably what really pulled it off the throttle body but none the less it was still shorter than it should be. The hot side off the turbo didn't look different at all but we didn't really measure it.

O dang. Well, before I even take the SURE tubes out of their packaging, I'll take off the stock tubes and see if I can compare the sizes in case my SURE tubes are short. Thanks for the heads up. I have no idea what I would even get on SURE's site if I did return the tubes. I only bought them because I had a free $50 to spend. They don't add power or anything, they just match my red intake HAHA!
 
could try and sell them or return them and sell the gift card to me so I can buy camber arms... (shady)
 
You can always buy a shift knob or vacuum tubing, #2.

Peaches, I think I should have an automatic +$15 bid since I work on your cars as much as my own. ;)

Patrick, this is going to ruin our short lived friendship. haha
 
I'm just kidding, buddy. Peaches is too greedy to give me a deal like that anyway.

What's the total? I would do $50 for the $100 and $25 for the $50 card. Anymore than that I'll just get the one from CP-e.

(sorry for all the posts today, guys. I'm bored as s*** at work.)
 
I'm just kidding, buddy. Peaches is too greedy to give me a deal like that anyway.

What's the total? I would do $50 for the $100 and $25 for the $50 card. Anymore than that I'll just get the one from CP-e.

(sorry for all the posts today, guys. I'm bored as s*** at work.)
its ok I got wind of a used set I'm trying to get for 110 shipped. go for it, I'll find other stuff
 
could try and sell them or return them and sell the gift card to me so I can buy camber arms... (shady)

HAHA!! Maybe.....



You can always buy a shift knob or vacuum tubing, #2.

Peaches, I think I should have an automatic +$15 bid since I work on your cars as much as my own. ;)

Patrick, this is going to ruin our short lived friendship. haha

I already have a TWM Big Type-R knob, which I LOVE. So no go on the shift knob and I don't think I need any vaccuum tubing.
 

New Threads and Articles

Back