What have you done to your MSP today?

[StealthWyvern]

well I neeed to change my oil but before that I need to figure out if my oil return line is leaking or if its my oil pan.. im guessing return line...

 

[terbow]

well I neeed to change my oil but before that I need to figure out if my oil return line is leaking or if its my oil pan.. im guessing return line...

Mine would always leak at the turbo till i added a drain gasket. Seems to have helped.

 

[StealthWyvern]

Mine would always leak at the turbo till i added a drain gasket. Seems to have helped.

That was all replaced not to long ago.. it might be the actual line for all i know.

Edit: All I know is the bottom of my oil pan is covered in oil and more then likely my entire underside of the car.

 

[destineal]

Well its got all brand new o2 sensors about 2 months ago. I am missing a bolt on the exhaust mani but it shows no sign of leaking and I can't put another bolt in before anyone suggests it. And when i had the callaway out 8k miles ago it had no cracks in it.

seafoam time

 

[SCMP3]

And what would that do for me exactly?

 

[terbow]

That was all replaced not to long ago.. it might be the actual line for all i know.

Edit: All I know is the bottom of my oil pan is covered in oil and more then likely my entire underside of the car.

yea i believe its a 2 piece line so check under the heat blanket where the connection is as well. I had to redo mine

 

[StealthWyvern]

yea i believe its a 2 piece line so check under the heat blanket where the connection is as well. I had to redo mine

Ill mess with it after work hopefully if I get time. Thankfully im carpooling this week and im not driving.

 

[Maiello169]

Grrr this p0171 lean code is pissing me off

Same here! It's been in for over 2 weeks now and everything checks out fine, did 2 sea faom treatments too, code just doe I
sn't want to hi away and the car is running mint !

 

[Maiello169]

My o2 was replaced in September .... So its not the o2 sencor that's throughing this code on mine....

 

[SCMP3]

Mine has a weird hesitation thing under wot while in boost. It doesn't do it all the time just sometimes. And it doesn't lean out or run super rich according to my wb. Feels like either a fuel problem or ignition problem. Has newer wires and coil packs. Also has brand new plugs.

 

[Maiello169]

Yeah I just put all new coil/packs, wire spark in mine as well, one of the 4 reasons for the code is fuel presure.... I don't feel a differance... Or the MAF , that's working.like it should be, or.could be a mass vac leak .... So I have no clue anymore lol

 

[o0n8]

I turned my msp into a garage queen on saturday, bought a 03 p5 to dd

 

[Maiello169]

I wanted to get some kind of suv or truck for the winter and.garage the msp.... Well garage is full of other.cars so it would have been a car cover queen lol does look like that's gunna happy DD she is ....

 

[o0n8]

the msp was supposed to be my dd but then I went a little mod crazy

 

[Maiello169]

the msp was supposed to be my dd but then I went a little mod crazy

Hahaha

 

[Preferio]

What's the inlet side of the turbocharger diameter?

 

[o0n8]

60 mm or 2.37 in.
http://www.turbobygarrett.com/turbo...roup/drawing/Garrett_GT2554R_471171_3_new.pdf

 

[2.0t03speed]

Hello old friends the news for today is project take my msp from somewhat stock to modded round 4 is a go. s15 gt28r to be ordered this afternoon. Feels good to want to mod my protege again lol at least for now.

 

[Dpwhitehead1]

Hello old friends the news for today is project take my msp from somewhat stock to modded round 4 is a go. s15 gt28r to be ordered this afternoon. Feels good to want to mod my protege again lol at least for now.

That's excellent to hear! Wish you didn't sell everything before!

 

[2.0t03speed]

That's excellent to hear! Wish you didn't sell everything before!

not everything is gone =D