What have you done to your MSP today?

[evilmonkeyMSP]

I believe you get 4 when you order. The midpipe hangers are a different size than the muffler hangers. Maybe thats why there are only 2 pictured?

 

[Valk]

Cool. Now just have to decide on 2.5 or 3". Would like to get a downpipe but need a new manifold first. Passing 120km too so
Prob need to start thinking about timing belt/water pump/ alternator? Need new battery too. Car gonna be expensive this year. But i still
Love her.

 

[SCMP3]

All the hangers are the same. And you may as well get the 80mm then get the pope dp later. The dp feels so good.

 

[Valk]

Need a steedspeed/thunder first. Manifold still cracked and missing two bolts. Got arps but not gonna bother until a replace the manifold.

 

[hornsfan10609]

Usually it takes quite a while for a significant amount of oil to buildup in the pipes. I've only emptied my catch can a couple of times since I first installed it like 5 months ago and every time there was barely any oil in it.

I have a catch can on my Bullitt and it fills with oil really quick. It's naturally aspirated.

 

[323]

does anyone know where to get these little cap/plug thingies? its for my boost gauge. i don't know what they're called, but mine is starting to crack as you can see in the photo. its the one to the far right. it popped off one day after boosting and then the car started idling like ass until my friend saw it and plugged it back in (stoned)

 

[Wagonbacker9]

replace the vacuum hose... I doubt you'll find the one-off part.

 

[323]

i'll prolly look into that then. today: rotated tires, cleaned MAF sensor, cleaned wheels, applied tire shine, cleaned interior i should of cleaned out my trunk too

 

[hornsfan10609]

I finally bolted the head back on and installed the cams, then my torque wrench broke. Luckily it's a Craftsman so I can get another one tomorrow. Stupid thing was $100 i'm surprised it broke i've used it maybe 3-4 times. Next is bolt the exhaust and intake manifolds back up, reinstall the cam gears and timing belt/covers. Then put the belts on and reinstall the hard pipes and finally drive the damned thing! It's been WAY too long, over 3 weeks!

 

[destineal]

I laugh at your 3 weeks

 

[hornsfan10609]

I laugh at your, wait how LONG has it been? At least you (should) have GI Joe beat. It wouldn't be as bad if I hadn't wrecked my backup vehicle.

 

[destineal]

:'(

 

[lizardman743]

I laugh at your, wait how LONG has it been? At least you (should) have GI Joe beat. It wouldn't be as bad if I hadn't wrecked my backup vehicle.

:'(

Boom.

 

[destineal]

This gonna be a problem?

 

[Ricktalife]

The manifold will probably melt it lol. I would just take it off as long as the actuator itself doesn't touch.

 

[SCMP3]

put my new headlights in last week but i just got around to taking pics. and i put my fog lights on. finally.

 

[destineal]

they look so clean

 

[MSP1714]

the old motor i got with the car when i bought it, guy said it was knocking like crazy so i took it all apart today. he told me he thought he blew a rod. well i come to find out the rods are fine, and everything else looks great.
any idea of what could have went wrong in that motor?
plus i'm going to use it to forge it and run more boost on my daily driver msp.

 

[mildsalsa]

cleaned, repainted a few engine pieces, changed oil and seafoamed ... other then that im just waiting now for eecmm in robbinsville NC this weekend

 

[o0n8]

the old motor i got with the car when i bought it, guy said it was knocking like crazy so i took it all apart today. he told me he thought he blew a rod. well i come to find out the rods are fine, and everything else looks great.
any idea of what could have went wrong in that motor?
plus i'm going to use it to forge it and run more boost on my daily driver msp.

miss timed?