What have you done to your MSP today?

Well I just pulled off the piping to clean everything out, and miraculously there was like absolutely no oil at all in there and I hadn't even had a chance to clean it out since I put the breather filter on the crankcase, I guess I'm lucky???
 
Usually it takes quite a while for a significant amount of oil to buildup in the pipes. I've only emptied my catch can a couple of times since I first installed it like 5 months ago and every time there was barely any oil in it.
 
Well I mean, it was FLOODED with oil last week. And I didn't clean it out but went to clean it today when I was gonna check for shaft play to see if it was the turbo and there wasn't a drop in there, I'm gonna make a catchcan here soon though, I'm just happy the oil isn't in the turbo:)
 
alright. couple of dumb questions im sure have been answered... corksport 80mm exhaust. does it fit the stock j pipe? also, corksport says 4 hangers for protege but only show two in their product description. do you get 2 or 4 with the set?

figure i should take care of these clogged cats pretty soon. got on the gas today and i start slowing down.. like someone pulled the ebrake. been bogging for and smelling like eggs for a little while, ive just been gentle to it.
 
there are 4 hangers

two for the mid pipe and two in the back

not sure about the fitment

also when you take off your cat that thing is worth about 50 bucks in scrap so dont just chuck it. In case you didnt know
 
alright. couple of dumb questions im sure have been answered... corksport 80mm exhaust. does it fit the stock j pipe? also, corksport says 4 hangers for protege but only show two in their product description. do you get 2 or 4 with the set?

figure i should take care of these clogged cats pretty soon. got on the gas today and i start slowing down.. like someone pulled the ebrake. been bogging for and smelling like eggs for a little while, ive just been gentle to it.

Yes, the CS exhaust bolts up to the stock J-Pipe.
 
I was Wondering if anybody here have removed the Magnets from a SR Adjustable Cam Gear, I need to delete 2 of the 3 pick up magnets it comes with the cam in order to run Sequential Injection on my Haltech, I have the 626 Cam gear with one Magnet but would love to keep my SR, here is the picture of the ones i need to get rid off.. Any Clue Guys Thanks..

mazda%20cams%20%20gear.jpg
 
Who has a nice waist? :p

I ment waste. Autocorrect on my phone lol
Also my brakes started making some loud making alot of noise after my mountain run last week. So I guess I need new fronts(where the noise was coming from) so I just placed an order for speed6 front loaded calipers ;)
 
Should be finishing up today on installing valve guides and seals new headgasket ( old was blown) and awr rear mm.
 

New Threads and Articles

Back