scratch that, i now have to reschedual my day tomorrow and make it BACK to the dealership before i do anything because they didnt bolt the under tray back on properly after doing the oil change
What have you done to your Mazda6 today?
- Thread starter Antoine
- Start date
scratch that, i now have to reschedual my day tomorrow and make it BACK to the dealership before i do anything because they didnt bolt the under tray back on properly after doing the oil change
My girlfriend is the cashier there, and I have become good friends with the tech and service manager that has serviced my car since owning it. I had my clutch, flywheel, pressure plate, and throwout bearing replaced about 2 months ago. Well now at low speeds I can feel every single bump through the steering wheel. Like something has worked itself loose. Other than that I'll have them check for leaks, everything greased up, basically just a thorough inspection.
my half-ass'd attempt to fix my bumper is now complete. I really need to get some extra cash together so I can buy a whole new setup
That rear diffuser is $385.00 for each side....Found that out a month ago.
- :
- MazdaSpeed 6
mmm 200 something on SU.. 385 from the dealer.. dealer is always more expensive.. but yes the whole rear bumpers overall cost is near 1 grand.. (screwy)
Well I got mine for $150 thanks to my girlfriend.. (upbum) I didn't know SU sold them.. Good lookin' out!
vrspeedemon
Member
Can you share the girlfriend discount on the rear bumper insert?
I need a drivers side
I need a drivers side
- :
- 2011 Mustang GT
The birds decided to tag the hell outta my car, so I cleaned the s*** off and wiped it down with some QD again.
Oh, and I ordered my 5.0 tonight. 5-6 weeks and I'm out.
Oh, and I ordered my 5.0 tonight. 5-6 weeks and I'm out.
ESB Jiu JItsu
Member
- :
- 2006 MS6 GT
Install went great took a little longer then expected. Word to the wise just go ahead and unplug all the plugs in the area of the stock TIP. Also remove the battery and trey. I also removed my fujita just to give some breathing room. The more you remove the easier the fit. took about an hour and a half. Some of that time was buffing the turbo
and dreaming about a BT hahahaha. The PG inlet, fujita intake and Turbo XS RFL BOV sound amazing as a combo and I really feel much smoother responce, a spool up of atleast 500 to 750 faster, and just really smoothed out my car. She purrs like a kitten at rest and sound amazing when adding throttle. The sound is so addictive. Any way im going to be posting a review in just a min.I can look into it if you would like..for realzCan you share the girlfriend discount on the rear bumper insert?
I need a drivers side
ESB Jiu JItsu
Member
- :
- 2006 MS6 GT
- :
- MazdaSpeed 6
AFR's are solid and so is your fuel pressure, but your LTFT's are a bit high id like to see that number closer to 0%..
would also like to see your boost be alittle more consistent. drops off almost 6psi on the log.
you have 2 PM's and a email with a Map
btw any of you guys that have an AP and want help feel free to pm me. i haz skills!!
would also like to see your boost be alittle more consistent. drops off almost 6psi on the log.
you have 2 PM's and a email with a Map
btw any of you guys that have an AP and want help feel free to pm me. i haz skills!!
Last edited:
kahmikahze
Member
- :
- 2006 Black Cherry Mazdaspeed 6
AFR's are solid and so is your fuel pressure, but your LTFT's are a bit high id like to see that number closer to 0%..
would also like to see your boost be alittle more consistent. drops off almost 6psi on the log.
you have 2 PM's and a email with a Map
btw any of you guys that have an AP and want help feel free to pm me. i haz skills!!
As soon as I get mine, you'll have a PM in your box....
so to speak
- :
- MazdaSpeed 6
