New Pics (Metro Grey W/ MS6 Rims in Black)

[Silver Ecstasy]

the MS6 wheels are quite literally the fugliest stock wheels I've ever seen. They look like F'in snowflakes! Even though the MS3 wheels are similar... they are 10 billion x better looking.

That's actually the first time i've heard that.

MS6 and MS3 owners have swapped wheels before, or photoshopped and it has always been concluded that Mazda almost should have just swapped designs to begin with.

I am a fan of both wheels. The only wheel I feel is getting a little played out are the RX-8 five spokers. Those look real clean, I just seem them a lot now on MS3's and MZ3's.

 

[scatt nasty]

Some Side Pics

shwing!

 

[CWPspeed3]

Looks sweet, I like the black ms6 rims. It would look even more ninja like without door moldings haha

 

[stageup]

looking @ your hks ssqv, you got it pretty angled, is it causing plastic to rub away from the ducting on the hood?
can you take some more pics of the recirc fitting connection? and ssqv mounting close ups ? mine still is crimping a little. i have the cobb intake as well.

 

[LOL WUT]

Thanks for the side pics! It looks great man!

 

[Silver Ecstasy]

I have to agree with Matt. Rip those door moldings off and lower it just a smidge and you have one sexy looking ride!

My only request would have been to gloss the wheels more. Or maybe I just can't see it in the picture.

 

[lanny709]

Nice wheels man! sick license plate too haha

 

[TRDMS3]

bad ass combo m8 (headbang)

 

[Fenrir]

I have to agree with Matt. Rip those door moldings off and lower it just a smidge and you have one sexy looking ride!

My only request would have been to gloss the wheels more. Or maybe I just can't see it in the picture.

Why is everyone obsessed with ripping the door moldings off? I think the car looks better with them on, and if some dimwit (probably someone who ripped the molding of their own car *whistle*) bumps their door into my car, they help protect it from dings.

 

[Silver Ecstasy]

Honestly, I left mine on. But darker cars with no moldings look better imo. Shows off the shoulder lines over the wheel wheels more.

But I like MY particular car with them on. But they don't protect from dings. They hardly stick out further than the rocker ground effect. You'll basically have to hope that the door who hits you hits that molding spot on from the corner of their door. Otherwise, it will be dinged.

 

[Jasnall]

The black wheels and emblems look nice on the MG. Hey what Recirc hose are u using? I want to replace mine because the stock one is all squished with my synapse bov.

 

[CWPspeed3]

Why is everyone obsessed with ripping the door moldings off? I think the car looks better with them on, and if some dimwit (probably someone who ripped the molding of their own car *whistle*) bumps their door into my car, they help protect it from dings.

Open a door next to your car, those moldings arent close to anywhere that would protect your car. I like the clean look with them off and mine being white the moldings color didnt match so it looked weird.

Honestly, I left mine on. But darker cars with no moldings look better imo. Shows off the shoulder lines over the wheel wheels more.

But I like MY particular car with them on. But they don't protect from dings. They hardly stick out further than the rocker ground effect. You'll basically have to hope that the door who hits you hits that molding spot on from the corner of their door. Otherwise, it will be dinged.

I was going to say you advocating someone taking the moldings off and you wont take yours off ironic...

 

[Fenrir]

Honestly, I left mine on. But darker cars with no moldings look better imo. Shows off the shoulder lines over the wheel wheels more.

But I like MY particular car with them on.

Mine is Black Mica (Well, sort of salt-gray right now :\) and I like the look better with them on. Gives the eye a line to follow along the body, or something. Dunno, just like it

But they don't protect from dings. They hardly stick out further than the rocker ground effect. You'll basically have to hope that the door who hits you hits that molding spot on from the corner of their door. Otherwise, it will be dinged.

Yeah, I know. But there's always the chance they DO hit the molding

 

[scatt nasty]

looking @ your hks ssqv, you got it pretty angled, is it causing plastic to rub away from the ducting on the hood?
can you take some more pics of the recirc fitting connection? and ssqv mounting close ups ? mine still is crimping a little. i have the cobb intake as well.

The Recirc Hose Im using I ordered from Street****. I had to angle my BPV that way because the vaccuum hose was rubbing on the hood, and thats the only way that recirc hose would fit. It's currently coming into contact with the actual intake silicone, and is barely hanging on there, I got that clamp real tight. It's all put just right.

-Lowering Springs are gonna be in the mix in the future
-Door moldings will be removed, after this wax I just put on fades lol

-I got my FMIC on the way too, The piping and core is going to be black, and it will have blue couplers to match the intake/recirc hose. Once I get those on there it's going to look so tits with the ninja core barely visible, yet the blue couplers giving it away.

 

[chief_wiggum]

Very nice -- MGM FTW indeed.

 

[Silver Ecstasy]

I was going to say you advocating someone taking the moldings off and you wont take yours off ironic...

It's still a soft spot for me personally, but the more I look at your car, I like it. But then again, your car is lowered and to me, that makes a difference.

 

[CHICO2003]

I don't get why everyone thinks removing the side moldings makes the car look better. s***.. .I think the car looks like ass without em. Like a freakin minivan or something generic like a corolla. idk... it's hard to describe really. I just think people sometimes make changes to a car just for the sake of making a change. I realize you don't want to look like every other MS3 out there but... there aren't that many of them (relatively speaking) to begin with! So, by default, you've got a unique car.

but whatever... the more you MS3 guys take your side moldings off and fuglifiy your wheels... the more unique my stocker will look! haha j/k about the wheels... well, not really

 

[CWPspeed3]

I don't get why everyone thinks removing the side moldings makes the car look better. s***.. .I think the car looks like ass without em. Like a freakin minivan or something generic like a corolla. idk... it's hard to describe really. I just think people sometimes make changes to a car just for the sake of making a change. I realize you don't want to look like every other MS3 out there but... there aren't that many of them (relatively speaking) to begin with! So, by default, you've got a unique car.

but whatever... the more you MS3 guys take your side moldings off and fuglifiy your wheels... the more unique my stocker will look! haha j/k about the wheels... well, not really

haha so soon the stock look will be the "original" look. I like my stock wheels, they will have my all seasons on

 

[Silver Ecstasy]

I think the car looks like ass without em. Like a freakin minivan or something generic like a corolla. idk... it's hard to describe really.

I used to think the same thing. It makes the car look really tall and bubbly.

But that's where I like the moldings stripped when it's lowered (ie. CWPspeed3's car).