My Turbo Timer Is Not Counting Down!! Need Help!

[ComeBack]

Hey my hks turbo timer isnt counting down. I installed everything correctly (i think) and it powers on but wont count down.

I have the red wire connected to the constant

blue wire connected to acc

and green connected to ing


Can anyone help????

 

[dominoy2k1]

you need one for the ebrake.

 

[ComeBack]

i thought you didnt have to have one... am i wrong on that?

 

[Prodigy]

if the e-brake isn't connected (grounded) it'll cut off.
It's a security feature...
*engine running when the car's parked*
*someone hops in the car to take off*
*drops e-brake*

*engine cuts off*

 

[dominoy2k1]

you need it to start countdown.

i thought you didnt have to have one... am i wrong on that?

 

[Bonafide_Spd3]

I don't got mine connected to the ebrake. Mine works perfect. I didn't feel like messing with the wires back there and time was a issue at the time of the install. I don't know why it isn't working right. So I don't think it's the ebrake

 

[phillyb]

is it ground?
do you have 4 or 5 wires for the timer?
even if the ebrake wire is not connected to the ebrake, it needs to be ground.

at this point, you will have two grounds...

 

[ComeBack]

my turbo timer has 6 wires

constant
acc
ing
parking break
rpm signal
speed sensor

 

[phillyb]

interesting...haven't seen the rpm wire...
make sure they're all hooked up. most timers won't work unless all of the wires are connected

 

[ComeBack]

so it half way works now hahahahaha


It powers on and counts down but it doesnt keep the motor running.... any ideas? switched wires?

the car stays ON though =/ so like the radio will still play but the motor doesnt stay running....

 

[UHATEIT]

so it half way works now hahahahaha


It powers on and counts down but it doesnt keep the motor running.... any ideas? switched wires?

the car stays ON though =/ so like the radio will still play but the motor doesnt stay running....

if your tt came with directions it will most likely say to hook to the e-brake or if not using it them ground it. You really should use the e-brake wire tho,m its such an easy wire to tap, right on the back of the e-brake. ACTUALLY if you just take out the center console dual cupholder piece you can get to the wire and use one of those crimpers. super easy dude.

 

[ComeBack]

All fixed... =]

the acc and ing wires were crossed.

 

[evo2ms3]

Is this the HKS Type 1? I had that before on my evo, and want it on this. Did you connect the rpm wire? Also, can you lock your doors with the remote during countdown?

 

[ComeBack]

i didnt connect the rpm wire and no you can not lock the doors on count down. I also did connect the ebrake line =]

 

[evo2ms3]

i didnt connect the rpm wire and no you can not lock the doors on count down. I also did connect the ebrake line =]

you can lock them from the inside though right?..lol..i've never done it. always use the remote.

 

[ComeBack]

yea i can lock them from the inside

 

[Bonafide_Spd3]

I guess that was a issue with a couple of people installing their turbo timer was the doors not locking. I was worried about that When I installed mine. But it all worked on the first try

 

[Prodigy]

You can cut the switched power on wire to the keyless entry box, then you can use the remote w/e.
I don't know which wire it is on the 3 but a multimeter will tell you.