Best Speed 3's

haha were starting next week...(bj)

with manuel or something else?

Ive done a bunch of s*** to mine lately and it looks amazing. I just need to get these ******* springs on. I have never done any suspension stuff so i am scared to death to try this. I am pretty good everywhere else.. but i dont feel like getting smacked in the face by a rogue spring
 
Can't see to find that fight on youtube. Anyone have a link to it somewhere?

You probably won't be able to find it without paying for it. Zuffa (company that owns the UFC) is really good at tracking down free vids and getting them shut down. I am pretty sure you can watch it for a fee from ufc.com.
 
with manuel or something else?

Ive done a bunch of s*** to mine lately and it looks amazing. I just need to get these ******* springs on. I have never done any suspension stuff so i am scared to death to try this. I am pretty good everywhere else.. but i dont feel like getting smacked in the face by a rogue spring

yeah with manuel been trying to catch u on aim but u havnt been on....springs are a b**** i did it on my specv and on my gto...if u do it make sure you buy a spring compressor.
 
ahhh MMA- my absolute favorite sport! It's my football, hockey, basketball, and baseball all rolled into one.
- Been a hard-core fan since '93 (UFC1)
- Have followed UFC, Pride, K-1, and KotK
- Attended 4 UFC in person (personally met Tito Ortiz, Maurice Smith, Marco Ruas, Kevin Randleman, Semmy Schilt, Frank Shamrock, Chuck Liddel, and Elvis Sinosic
- Personally trained under the Rickson Gracie academy for 1 year via Joe Diamond (Rickon Gracie Brown Belt)
- Shot ringside at an MMA event (Euphoria MFC- mixed fighting championship) http://www.gmelliottvideo.com/Sports
- Am looking forward to BJ dominating Daddy tonight :)
 
haha wow guys this thread is wayyyyy off topic. one of you guys should go start a MMA thread in the "off topic" section...
 
Engine Mod/transmissionBold

-HKS SSQV bov
-TWM shifter base bushings
-AWR 70mm engine mount
-ATP FMIC Garrett GT high density bar/plate intercooler
core capable of supporting over 400HP
-ATP High flow 3" turbo inlet pipe kit
-ATP High flow intake extension, MAF HSG And Filter Kit
-CPE turboback,
-CPE standback Tuned @ 18.8 by GSTMOTORSPORT
-266.4 whp@6250 rpm/292.0 tq@3750 rpm on mustang dynamometer

Suspension Mod:

-AWR custom valved Bistein racing shocks
-AWR rear endlinks
-MAZDASPEED Springs
-HOTCHKIS front/rear sway bars
-SPC rear adjustable camber kits

Brakes:

-CARBOTECH XP8 front pads
-CARBOTECH AX6 rear pads
-CORKSPORT SS Braided Brake Line Kit

Rolling:

-Enkei RSV 18x7.5 Falken rt615 235/40/18 (STREET)
-Sport Edition F10 17x8 kumho v710 245/40/17 (TRACK)

Interior/Electronics:

-Hertz HSK 165.3 6 1/2" 2 way component system
-HertZ HCX 165.3 6 1/2" coaxial speakers
-JL Audio A1400 1x500 watt amplifier
-JL Audio A4300 4x70 watt amplifier
-Dynamat Xtreme
-Shelby CS-750R Remote start alarm w/ 2 way paging system
-Beltronics Pro RX65
-HKS Turbo timer
-Greddy boost gauge

lubrication:

-Royal Purple 5w30
-Redline MT-90

3000797_1_full.jpg

3000797_3_full.jpg

3000797_13_full.jpg

3000797_11_full.jpg

3000797_12_full.jpg

3000797_5_full.jpg
 
Last edited:
266hp thats it???with all your mods...seems real low


Not really.. Mustangs read lower for one. (~15%) and you can adjust the settings on them to read whatever you want, for the most part. Hence the reason Laloosh is so anti dyno. EVERY SINGLE ONE is different. There are no 2 dynos that are the same. The number of pulls on them, age, maitnence.. all play a roll in the readings.

Like the owner of my local shop on their Mustang 1750.. he said he can jack up the numbers and have a "magical" dyno and have people coming from everywhere for big numbers like some of these dynojets.. But he is looking for the most accuracy as possible.
 
Not really.. Mustangs read lower for one. (~15%) and you can adjust the settings on them to read whatever you want, for the most part. Hence the reason Laloosh is so anti dyno. EVERY SINGLE ONE is different. There are no 2 dynos that are the same. The number of pulls on them, age, maitnence.. all play a roll in the readings.

Like the owner of my local shop on their Mustang 1750.. he said he can jack up the numbers and have a "magical" dyno and have people coming from everywhere for big numbers like some of these dynojets.. But he is looking for the most accuracy as possible.

thank you for clearing it up....dyno was done at GSTMOTORSPORT...they said their dyno is know as heartbreaker....but its most accuracy there is.... they dyno one of their sti @ 320 whp on the mustang the same day/same car right after on a dyno jet the sti @ 380....go figure....
 

New Threads and Articles

Back