choices choices choices...help!
- Thread starter 07speed3
- Start date
is that what the SBC finish means...chrome?
how black is the hyper black compared to the anchracite...it looks more like a greyish color...anyone with photoshop wouldnt mind maybe putting those on my car it would be appreciated
TX Speed 6
Member
- :
- Mazdaspeed 6
hyper black
5x114 +48
awsome thanks! ya i like the hyper black evo 6's the most too
just imagine teh sex on a bed of clouds... it'll look something like that.
but seriously, gimme a pic and i can give it a shot.
speed3convert
Member
Be certain that those wheels accept the Tire Pressure Sensors.
Many aftermarket wheels don't.
The Tire Rack has wheels that do and that's all they sell for our cars. They install the TPS units before they mount and balance the tires. They use the Hunter 9700 force balancing system, which is the best their is.
No, I don't work for them...
Also, someone above claimed that the offset for the MS3 is 48. It isn't. The stock offset is 52.5 mm.
I'm strongly considering the ASA AR1 (18" X 7.5" with a 52mm offset) for my Speed 3. They're $156 per wheel, which is very reasonable. They're also strong and relatively light.
http://www.tirerack.com/wheels/Whee...A&wheelModel=AR1&wheelFinish=Black+w/Mach+Lip
http://www.tirerack.com/upgrade_gar...A&wheelModel=AR1&wheelFinish=Black+w/Mach+Lip
Many aftermarket wheels don't.
The Tire Rack has wheels that do and that's all they sell for our cars. They install the TPS units before they mount and balance the tires. They use the Hunter 9700 force balancing system, which is the best their is.
No, I don't work for them...
Also, someone above claimed that the offset for the MS3 is 48. It isn't. The stock offset is 52.5 mm.
I'm strongly considering the ASA AR1 (18" X 7.5" with a 52mm offset) for my Speed 3. They're $156 per wheel, which is very reasonable. They're also strong and relatively light.
http://www.tirerack.com/wheels/Whee...A&wheelModel=AR1&wheelFinish=Black+w/Mach+Lip
http://www.tirerack.com/upgrade_gar...A&wheelModel=AR1&wheelFinish=Black+w/Mach+Lip
Last edited:
speed3convert
Member
The stock Speed3's offset is + 52.5 mm.
You should stay as close as possible to that when choosing an aftermarket wheel in order to preserve the correct suspension geometry. Altered offsets can result in "darty" behavior, particularly during medium to hard braking.
Wheels with different offsets will physically fit, but that doesn't mean they're correct for the application.
Last edited:
d'oh youre right, +48 is the offset for my new wheels... oops
- :
- 2016 GT ST 47A
All is forgiven as I still drool all over the keyboard when I see your sig with those very nice OZ's.
My choice is for the hyperblack.
