JIC magic users
- Thread starter mp3moose
- Start date
goldwing2000
Mazdas247 OG
- :
- 2018 Mazda6
2004 Mazda3 (sold)
2024 CX-5 (sold)
element.8 said:
So sayeth Eric The Bobblehead. (drive) (evil)
7
70
JIC offers different springs?
I have the A1's and would like to run a stiffer rear spring.
Where do they offer replacement springs?
I have the A1's and would like to run a stiffer rear spring.
Where do they offer replacement springs?
StuttersC said:
http://www.jic-magic.com/productsjic_susp_parts.htm
right there.
i'm contemplating the helper springs, myself. should soften the ride a little, and keep the spring control a little better.
7
70
Cool, thanks...
Delivery_Guy
ProfessionalWarrantyUser
- :
- MSP
To bring this back from the dead a little...
Is the damping on the A-1's in the rear adjustable from the bottom, or do you have to pull the rear deck apart?
Thanks for any help...trying to decide if I can save a few hundred bucks.
Also, anyone know if the A-1's rub on the stock MSP wheels like the A-2's do?
Is the damping on the A-1's in the rear adjustable from the bottom, or do you have to pull the rear deck apart?
Thanks for any help...trying to decide if I can save a few hundred bucks.
Also, anyone know if the A-1's rub on the stock MSP wheels like the A-2's do?
Last edited:
7
70
Pull off the rear deck and seat belts to adjust...The MSP wheels shouldn't touch, they more of an offset than the MP3 wheels. I they might not have been installed right if they rub...Delivery_Guy said:
7
70
Yes it is...mp3moose said:
Delivery_Guy
ProfessionalWarrantyUser
- :
- MSP
So, is there any reason to really adjust the rears? Is there a good all around setting that would work for auto-x and daily driving?
7
70
Yes...Becareful on the install. the holes on the lower mounting bracket are slotted. So, you need to make sure when you install them that the wheel is pulled all the way out, otherwise you might rub against the shock housing.supman said:i just received my set, dam they are the most beautiful things i've ever seen lol. Thanks autornd for fast shipping and service.
Now i'm just wondering, which is front and back? the ones with the camber plates is the fronts?
- :
- 10 MS3
I had mines put on last week by Chris up at SPD!! The JICS are awesome! The handling improve a bit from my Eibachs. Im having a problem with my camber on the left rear wheel, but we will take care of that ASAP. Also anyone have any clunking sounds when they first installed them?? Mines are slowly going away, but it sounds pretty cool when you go over a speed bump and it sounds like hydraulics 
