Essential Speed mazda speed upgrades and pricing

[markmurray77]

Mazda speed is being dynoed next week anticipating well over 220whp@ 12psi

will attach a few pics of the hard pipe kit/cold air intake for turbo feed.. for the mazda speed protege.
2002-2003 Mazda Speed 2.0L
So far the benefits of the hard pipe kit;
includes;
top and bottom intercooler piping constructed with 304 ss material
cold air intake(fender well location) c/w filter for turbo air supply
all needed silicone couplings and gear clamps
Essential Speed is now supplying a HKS super sequential B.O.V. it also comes with a recirculating hosing, to avoid that annoying stalling that comes with b.o.v. to atmoshere
An increase of 1psi over stock boost,smoothened power curve through boost and quicker throttle response.
Cost...........................................................1380.00 can. funds.shipping included plus taxes

Stage 2 (10-13psi)
additional intercooler piping and couplings
front mount intercooler(spearco core 3.5" x 7" x 12"lg )
c/w custom end tanks and the needed mounting hardware
radiator mounting bracket
Manual boost knob 0-25 psi
Essential Speed's fuel cut defenser module
cost of...................................................................................1450.00shipping included

Stage 3 (12 psi +)
**Stock and our mid pipe shown in the comparision pic**
Mid pipe with 2.5" hi-flow cat,flex pipe and 2.5" 304ss piping
this mid pipe is a direct fit between the callaway downpipe and the racing beat catback system.Our mid pipe flows 30-40% more air equalling in better flow and whp numbers
Essential Speed has found that at the same boost setting(10psi) on our boost knob after the mid pipe was installed our psi jumped to 15psi.We turned the boost down to 10 psi and spun an additional 15whp gain just by our mid pipe install.
..............................................................................cost of 675.00 can. funds plus shipping

Stage 4 (15psi+)
Vortech FMU rising rate fuel pressure regulator
all the needed lines and clamps for the install
cost of ...............................................................................325.00 can. plus shipping

Options
Ceramic coating of all pipes in the full kit......................................................425.00 can.
powder coating ...........................................................................................295.00 can.

 

[t3ase]

I'd highly suggest contacting enry to get an "Authorized Vendor" status. Too many people have been burned on here for most of us to shell out over a grand to someone we hardly know. Same reason I haven't ordered from iON. No real website, a university address, etc.

 

[markmurray77]

I'm actually just posting this as an option to people, I do not work for this shop. But they do have a website, just dont think its updated. www.essentialspeed.com They are just local to me and tell me when they have new products available

 

[t3ase]

Gotcha. Sorry, it came across to me as a sales pitch. Glad to see yet another company supporting the Protege community.

 

[markmurray77]

NP, I know what you are talking about, they do good work and have good service. ive dealt with them on several occasions

 

[t3ase]

Get me some hardpipes for free and we'll call it a truce.

 

[DevilsSi1481]

cool another site to add to protege owners lists.

 

[t3ase]

Way to increment that post count.

 

[markmurray77]

OK, heres the pics

 

[YuYuRena]

thanks for the work, but now are the performance run before the flash I presume?

And if I get a FMIC kit can I just jump straight to stage 2, instead of having all these pipes I have to buy (stage 1+ stage2)?

 

[Elderain]

yeah its before the flash because there IS NO FLASH YET

 

[YuYuRena]

flash is out brother, read that gigantic thread taht dex created

 

[markmurray77]

Best bet is to call or email the company directly.

 

[LiLiTaLy]

that's almost $1000 US for hardpipes everywhere else is advertising them for 400 or less? A lil bit of a rip off.

 

[markmurray77]

that's almost $1000 US for hardpipes everywhere else is advertising them for 400 or less? A lil bit of a rip off.

I think its because it come with a cold air intake and an HKS Recirculating BOV or atmosphere vented. There is the option to do either from what I understand. Not just a flange.

 

[LiLiTaLy]

400 for hardpipes + 200 for BOV + 25 for recirculating + 200 for cold air = 825, That would be a reasonable price plus shipping and taxes thats kinda crazy. The hardware sounds great but for the price I can't justify it.