Dynoed The MSP AT Rage-tek

[ueat1023]

I had some bad wires at the time but will dyno again very soon.(spank)

<object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/wfELwGAdDA8&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/wfELwGAdDA8&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>

<object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/lIvhAOPyy00&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/lIvhAOPyy00&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>

154hp 154tq with bad plugs
Intake
4 now


Well this is going to be a build thread(gun) also

As i get the stuff in I will also starting install and pics
(msptitani)

 

[808MP5]

So what u hit? And what are your mods?

 

[jonridinhi]

+1 I was not gojng to ask because maybe my computer did not load it but I guess I not the only one.

 

[ueat1023]

Bump

 

[theEZV]

sounds about right

 

[Speed3.5]

just for the hell of it, what numbers did you make ?

 

[Spiced MSP]

I think the camera guy forgot he had a camera in his hand throughout the video..lol I still need to dyno mine

 

[ueat1023]

just for the hell of it, what numbers did you make ?

154hp 154tq with bad plugs
Intake
4 now

 

[Speed3.5]

what's your mod list ?

 

[ueat1023]

intake> SS AFC coming soon

 

[arlsmazdaspeed]

Nice...

 

[43975]

That looks about right for basically a stock MSP

 

[justanothermp5]

dam really? i must be over 200whp then easily
i think once i get a job im going to get it dynoed at a local place over here, its only 80 bucks for 3 pulls
not sure if thats good or not but doesnt seem like too much

 

[ueat1023]

sounds about right

That looks about right for basically a stock MSP

True but that's with bad plugs and wires I will dyno again soon

 

[ueat1023]

BUMP up my views.

I will start street tuning my SS AFC and will post tuning vidz and driving.Stay tune
and even tho the SS AFC is a easy install i will post vidz and stuff.

 

[FLAMSP]

+1 good numbers for stock set-up, like the guy in the video said check plug gap/wires, would be cool to see a dyno comparison between 1.8 coils on plugs, and 2.0 coils. Check motor mounts i noticed some movement.

 

[ueat1023]

+1 good numbers for stock set-up, like the guy in the video said check plug gap/wires, would be cool to see a dyno comparison between 1.8 coils on plugs, and 2.0 coils. Check motor mounts i noticed some movement.

Thanks did it cars runs stronger..the engine movement was becuz like a boost cut but there was actually sparking coming out of the wires and coils. Will dyno again after I install SS AFC and start tuning.