Brake Fluid Exchange

I'm no expert on this 🤔 but just thinking logically, if the rear brakes were not in service mode, then the rear caliper pistons would be full of "old" fluid that wouldn't get flushed or exchanged. Same with the front caliper pistons ... I would think you would want all four caliper pistons compressed when you do a brake fluid exchange to get the maximum amount of old fluid out.

So, not only in service mode but also compress all the brake caliper pistons.

If you're not interested in doing all of that, flushing out the system without compressing the pistons would still be better than nothing.
 
Back