transmission

Hello! I recently purchased a used 2015 Mazda 3 Sport, with manual transmission. Although I have driven other manual transmission cars before, this is the first one that I have owned. All of the vehicles I learned to drive in were 5 speeds, with V6 engines. Obviously this car is a 6 speed with a...

Im wondering about my tcm in my 05 Mazda 3 hatch 2.3L 4sp auto I was looking to replace it with a refurbished one from the guy on eBay everyone on here talks about but was told that my 05 3 might not have a tcm. Can anyone help me with that? Does my 3 have a tcm if so where and can other year...

Hi new here 1st post I'll try to keep it quick Just bought a 05 Mazda 3 gt hatchback 2.3L 4sp auto with 115K miles clean inside and out from my uncle all for $1000 BUT he tells me he thinks the transmission is going to go soon it shift hard almost like it is holding back the engine and the at...

I recently purchased a Mazda cx7 2.3 turbo mzr disi with a 6 speed manual transmission from the UK. Since I got it I've been having a few issues but working on getting it up to standard. The most recent issue I came across was with the gearbox. It needs replacing or repair. Does anyone know if...

2006 Mazda mazda5 Idles hard when in reverse or drive but goes away after sitting in gear for a minute, Shift fine except when going 50 and passing 4th to 3rd is fine but it shift down to second and jumps, signs im seeing is torque converter but before i get to anything like that any ideas of...

So this new thing started happening. When I go to shift up from drive it will sometimes get stuck and won't go from Neutral to Reverse. I have to shift up and down a few times to get it to Reverse. Just earlier when I got home I backed into the driveway, after trying a couple times to get it to...

I bought a 2003 Mazda Protege5 from my friend. When i got it there was a rough idle. The RPMs would flutter between 1000 and 0. I got the codes read at O'Riellys and got Random Misfire, Misfire in cylinder 3 and one i can't remember but it's only offered solution was to replace the Idle Air...

I bought a 2003 Mazda Protege5 from my friend. When i got it there was a rough idle. The RPMs would flutter between 1000 and 0. I got the codes read at O'Riellys and got Random Misfire, Misfire in cylinder 3 and one i can't remember but it's only offered solution was to replace the Idle Air...

Hi guys. Normally have an issue after about 5-10 minutes of driving. When coming to a stop the noise start to appear at around 20km/hr. My last service was told that my discs need machining however the noise sound more mechanical like a grinding diff or something. About 180,000 ks on the clock

Hi, Sold my P5 with 205,000! Now for the car I really wanted. 2005 M3, SP23, auto trans - stock everything. Front brakes need replacing: Is there a Big Brake Mod? Clink in the trans changing from park to drive: Motor Mounts? Anything I really need to consider on upgrading? I'm going to...

I have only 2200.00 miles on the odometer as of right now. The problem I have currently having is: Vehicle is Lurching/Jumping/Jolting/Jerking forward when it is shifting from 3rd to 2nd and 2nd to 1st gears. Especially when it switches from 2nd to 1st (to Example: when slowing down at the stop...

I have broken shift cable in my 98 mazda protege. I cant find information or videos on how to remove and install a new one. I already have the new one but not much informatiom on how to install

I have a check engine light on and after running the code reader I get back P0733 (Gear 3 Incorrect Ratio). After looking into the issue found that this could be caused by the Shift Solenoid, so I replaced both got everything back together cleared the code from the computer and went for a drive...

Hey guys, Recently I bought a used 2015 mazda 6 auto (petrol) and I found that every time when its a cold start the transmission will be jerky between 1st to 2nd gear, the symptom will 100% appear when: 1. The car is in cold condition 2. Step on the throttle gently, when the speed is about...

Hello everyone :P Just wondering if anyone could give some suggestions or share their opinions on atf leaking for 2012 mazda2 ~ Few days ago, I added ~1/8 quarter of OEM atf to my car due to the slight shift shock. Before adding atf, the 2nd-3rd shift was very noticeable and 1st-2nd shift...

2013 CPO CX-5 2.0L 76k miles Avg. Fuelly MPG = 29.6 Throttle response was getting a bit spongy/soft on 1st, 2nd and 3rd gear acceleration. Shift points were reving RPM's higher then normal where 3rd gear felt labored holding a higher rpm. Downshift slow to respond climbing hills. Overall...

Just curious. what is Mazda's reasoning for having a small (approx. 3"Dia. x 11/2" thick) cooler that has coolant lines from engine when fluid lines also go thru radiator? I am trying to install a Hayden Trans Cooler and not quite sure which is the return line. Thanks in advance for your help.

Recently encountered a problem with "Set to P to turn off power". My 2014 CX-5, would not totally turn off the ignition. Auxiliary power remained on.So radio etc. stayed on. Doors would not lock and it would not shut off after 5 mins. It was fully in Park. I started and shifted into park several...

One weak ago i change the transmission field of my CX-9 2011 , after changing when i put it in D there is click in the gear box . I put a motorcraft Premium Automatic Transmission Fluid .

Selling the MX-3 after a few years of ownership. If you've got questions feel free to text/e-mail. Asking $2,500 or trade for running CJ Jeep. [link removed]