transmission

I have only 2200.00 miles on the odometer as of right now. The problem I have currently having is: Vehicle is Lurching/Jumping/Jolting/Jerking forward when it is shifting from 3rd to 2nd and 2nd to 1st gears. Especially when it switches from 2nd to 1st (to Example: when slowing down at the stop...

I have broken shift cable in my 98 mazda protege. I cant find information or videos on how to remove and install a new one. I already have the new one but not much informatiom on how to install

I have a check engine light on and after running the code reader I get back P0733 (Gear 3 Incorrect Ratio). After looking into the issue found that this could be caused by the Shift Solenoid, so I replaced both got everything back together cleared the code from the computer and went for a drive...

Hey guys, Recently I bought a used 2015 mazda 6 auto (petrol) and I found that every time when its a cold start the transmission will be jerky between 1st to 2nd gear, the symptom will 100% appear when: 1. The car is in cold condition 2. Step on the throttle gently, when the speed is about...

Hello all ! I have started a little side project and my first parts for sale are shift knobs for the Mazda2. Check them out and let me know what you think. http://projectlabb.com

Hello everyone :P Just wondering if anyone could give some suggestions or share their opinions on atf leaking for 2012 mazda2 ~ Few days ago, I added ~1/8 quarter of OEM atf to my car due to the slight shift shock. Before adding atf, the 2nd-3rd shift was very noticeable and 1st-2nd shift...

2013 CPO CX-5 2.0L 76k miles Avg. Fuelly MPG = 29.6 Throttle response was getting a bit spongy/soft on 1st, 2nd and 3rd gear acceleration. Shift points were reving RPM's higher then normal where 3rd gear felt labored holding a higher rpm. Downshift slow to respond climbing hills. Overall...

Just curious. what is Mazda's reasoning for having a small (approx. 3"Dia. x 11/2" thick) cooler that has coolant lines from engine when fluid lines also go thru radiator? I am trying to install a Hayden Trans Cooler and not quite sure which is the return line. Thanks in advance for your help.

Recently encountered a problem with "Set to P to turn off power". My 2014 CX-5, would not totally turn off the ignition. Auxiliary power remained on.So radio etc. stayed on. Doors would not lock and it would not shut off after 5 mins. It was fully in Park. I started and shifted into park several...

One weak ago i change the transmission field of my CX-9 2011 , after changing when i put it in D there is click in the gear box . I put a motorcraft Premium Automatic Transmission Fluid .

Selling the MX-3 after a few years of ownership. If you've got questions feel free to text/e-mail. Asking $2,500 or trade for running CJ Jeep. [link removed]

I pulled my manual trans today to replace the rear main seal, RTV the MBSP bolts, and replace the clutch and flywheel. I pulled the trans, clutch, and flywheel and saw that the bearings were seized to s*** and left rusted metal dust everywhere. I inspected the trans shaft and it appears that it...

Hi, new here. I'm interested in a CX-5 with a manual transmission. Should I get the last 2016 on the lot or wait for the new 2017. The dealership is telling me the 2017 version will not come with a manual transmission. Does anybody know if that is true?

we're doing a lot of work on our 03 pr5. clutch, transmission seal, shock n struts, motor mounts, flywheel, control arms, cv axles, etc...now our transmission wont go back in and keep slipping down...any advice on how to get it back into place and make it stay?

I've been on the 2016 vs 2017 fence for a while now. Without starting the "which is better" I thought I'd look at what I care about most, and a BIG part of that is mileage. So we know that Mazda is ditching the 2.0L engine for 2017, but what I haven't seen definitive information on is whether or...

I have a 2004 Mazda 6i with the 2.3L engine. I purchased this vehicle after it was in a minor accident. Assume it was working before wreck but unsure. Parts replaced: hood, bumper cover, core support, radiator, ac condensor and such. No damage to engine. Still starts and runs. No frame...

Just joined Mazdas247, so hello everyone! I want to share my experience about replacing my Transmisison Control Module: The vehicle is a 2008 Mazda 5 2.3l automatic. Not certain what trim level. Initial problems were random and infrequent hiccups in power, AT light turned on with code U0101...

So the other week I was driving down the road at about 35mph stuck behind someone, I went to pass the person and my transmission lost power. It would rev up to 6000rpm, but no power to the wheels. I put the car into "manual mode" attempting to manually shift the car into a gear, but it just...

Hey y'all, I've been lurking your forum for the weekend since I had to replace my coolant reservoir (and my battery immediately after. sigh.) - I bought my car on Craigslist a few months back and didn't get a manual, figured I can't be the only one who might need it, so have some linksauce to...

Hello, I have auto trans MP5 2003 with 97k. Its slipping between 2nd and 3rd gear. She will try to shift and 2000 rpm at a normal driving speed and will slip to about 2700-3000 rpms and catch 3rd gear and drop to 1200-1500 rpms. I don't have a slipping problem in any other gears. I have been...