wierd...

[tuOdekcalB]

So i heard like noise coming from engine, so today while cleaning it i open the hood to see what it was, then i noticed my cobb sri intake was not attached to that black hook to keep it in place and saw one screw on the bottom of my engine bay and the other one almost falling out, the 2 washers and nuts are gone.... how can i get another set of them???

 

[AutoEuphoria]

Lowes. Just standard nuts, really. Just use locktite next time. If you have a bolt, take it to Lowes or Home Depot and go to the fasteners section and use the little sizer they usually have on the wall to figure out what nut will work with that bolt. Or just ask someone. Probably cost you less than a buck.

 

[tuOdekcalB]

when looking for some nuts realized i could just zip tie it and that def wont break, i hope

 

[MSMS3]

IMHO, take a little time and go to Lowes, Home Depot or you local hardware store, get the proper nuts, washers, bolts to do the job right. Put a little red Locktite on the threads and you'll never have to worry. Just a thought.

 

[tuOdekcalB]

you think just using 2 zip ties is bad?? seems to be working great now it isn't moving it locked tight to the arm.