what U want in CF

[orphman]

Bump

 

[orphman]

what you have suggested thus far





--------------------------------------------------------------------------------

hi all,

Well an update to all of your responces...

so far you guys have replied indicated the following (sorry if i missed your idea)

steering wheels on top ten list.
head-rest inserts, rear veiw mirror in CF
replica side mirrors(not just covers), dual and triple gauge pods, 03.5 wings, the leadfoot bezel, MSP rear lip replica. Different styles of grills on top ten list.
INTERCOOLER Pipes on top ten list.
Intakes, intercooler pipes, air "diverter" plate for radiator. Flat block off on top ten list. panel/plate to replace sidemount when upgrading to an FMIC.
Steering column guage pods/cups. on top ten list.
Intake with a CF airbox that sits behind driver's headlight and takes air from fender, etc... on top ten list.
Carbon fog light covers like on Subi STi's
CF lip/splitter for the 03.5 bumper on top ten list.
wiper cowl
rear decklid??
99-00 OEM Style CF Hood
How about an AutoEXE style grille for 01-03 non-MSP/MP3 sedans? Here's a thread with 22+ probable buyers. Currently no options. Nobody has stepped up to fab one in any material. on top ten list.
Then it would also be nice to replicate a full lip kit for 01-03 sedans as well.

Use the Mazda front lip, the Mazda side skirts, and the Mazda rear lip. DG does the sides only. on top ten list.

How bout a c/f sunroof slide if it is possilbe??
CF under drive pulleys anyone? hmm sounds good to me! dont know if can make work yet...
FYI redesigned engine cover would be niiiice. You could put a LCD screen in it like Pimp My Ride style O|\/|G sw33t m4|\|
ok seriously I would consider buying a redesigned engine cover.

how about the interior where the stock HU is, next to it the fake cf should be done in cf maybe a whole cf piece for the stock stereo for protege5?
CF endlinks
body kit... personal fav!!! the absolute reason
CF cup holders and center console
I would like to see CF door panels for the front and rear of the P5.
Something to fit the 03.5 front end! (splitter, etc..)

I would love to see a CF trunk lip spoiler, akin to the one on, say, an IS 300, that used the stock mountings locations and housed a third brake light.
rear diffuser






bump for this also if you made c/f door panels including the window crank
regular protege lip would also be nice i'd like the rear deck too i'd like more stuff can't think of it now tho


thanks for all the responces keep them coming even if it has nothinng to do with Proteges keep it mazda plz... but whatever

THATS WHAT YOU HAVE SAID THUS FAR

 

[SubXer0]

just turn off sigs if you dont like them

word
peace
dante

 

[jonlong]

I want carbon fiber kick-panel speaker enclosures and carbon fiber tweeter pods to replace the factory ones. I want the tweeter pods to have a flush-mounted tweeter so you can see it, unlike the stock ones where it is hidden behind the grill.

For the P5, a carbon fiber privacy hatch cover (that thing that covers your trunk area that lifts up when you open the hatch) would be cool. Maybe one that has "MAZDA" painted on it, or made of aluminum letters.

If you want to make something not car related, I would like a carbon fiber computer case.

And then, I want a life-size statue of me made out of carbon fiber and internally reinforced with a titanium frame. I want it to have a N02 purge system that blows out of my ass when I pull on the titanium spring loaded finger. The purge system will have to have an LED of course, to light it up at night.

 

[SubXer0]

/\ LMAO!!!
peace
dante

 

[orphman]

time table

Wanted everyone to know.... Looks like this will be April // May relase date for the company. I wont be in my house untill after thanksgiving but before the new year... once its complete everything is a go for the spring . if you have contacted me for any reason and want an update PM me and ill give you a run down for whats up.

thanks
Orph

 

[rdmp5!!]

just wonderin'

dont know if you were plannin on having any colored cf products, but there is an idea for you. anyhow, i would like the lips, ect. like every one else, but how about a cf trunk floor, maybe with pre-cut holes for subs? that sounds like hottness to me. just an opinion.

 

[JDM-P5]

Fenders!

 

[SubXer0]

but how about a cf trunk floor, maybe with pre-cut holes for subs? that sounds like hottness to me. just an opinion.

omg +1 i can't belive i didn't think of that

 

[JOS3]

cf mazda3 parts - ie; rear deck lid, interior dash pieces, grill, eyelids, spoiler, etc.

 

[Titanium-99]

some head light housings and rear housings made of CF would be killer. A CF wing of the stock 03.5 mazdaspeed design would be nice too.

 

[orphman]

some head light housings and rear housings made of CF would be killer. A CF wing of the stock 03.5 mazdaspeed design would be nice too.

that may be tricky.. i dont know all of the ins and outs for removing the clear parts of the houseing and then re applying them.. ill add it to the the ... "maybe " list...

 

[Fast lane]

Please!!! Make a Carbon fiber body body kit! if you could do a wide body kit that would be even better im going crazy trying to find somewhere to make me one..

Thanks,
Matt

 

[orphman]

Please!!! Make a Carbon fiber body body kit! if you could do a wide body kit that would be even better im going crazy trying to find somewhere to make me one..

Thanks,
Matt

Hey, check out thread number 77, it has a list of what were gonna do and what not... if its got a top ten.. thats one of the parts you will see wiht in the fist 6 mo. of shop opening.

 

[capnsavem]

interested in this:

"Intake with a CF airbox that sits behind driver's headlight and takes air from fender, etc... on top ten list."

if its gonna be for NA proteges- not turbo

 

[ENTENSE]

wanting cf door panels for front and back of P5.....

 

[Gambino]

hey, dont know if it has been said (dont feel like reading all 8 pages), but almost anything for a 3. specifically hood & lip kit

 

[Foolish]

Door skins. Then the guys with white Proteges could get CF hoods, trunklids and doors, and look like the carbon fiber police!
(five-0)

 

[lcruz64]

Leadfoot's bezel in cf.

 

[kurt]

How about a nice CF duckbill rear spoiler for the Pro5? The kind you see on an EG/EK Civic hatch.