What have you done to your P5 today?

[ucMP3]

lol with the power mirrors you just unclip the wiring harness.... Add ~30 secs to the 3 bolts, lol.

 

[ScratchNSniff]

Yea, they are power also, but the wire for the lights on them go through the mirror, through the door, through the rubber piece where the door wiring is, down the step plates, up the B panels, and then under the headliner...that was more of the problem...

 

[TWISFM]

NICEEEEEEEEEEE SCRATCH



also replaced the pcv with another stock one from mazda... no more burning oil...fingers crossed?

 

[justanothermp5]

burning oil increases HP bro

 

[ScratchNSniff]

Lol...

 

[ucMP3]

burning oil increases HP bro

You got that backwards...

 

[TWISFM]

mer

 

[ScratchNSniff]

Also got these...plus two compressors and a holding tank...now just one more thing to install...

Got Joka1's custom made harness bar as well...should be here on Satuday...

 

[TWISFM]

I demand videos of you scaring the s*** out of people.. also pretend to be a bus and pic people up...and then BBBBBBZZZZZZZZZZZZZZ

 

[ScratchNSniff]

Messed up...haha...

 

[Rockin03mp5]

Thanks...as you can see we decided to do the door mouldings where the vinyl was in Black mica as well...they were in rough shape, so figured we would do something a bit different...haven't seen that done before...the Black Mica looks great...the flake in it looks awesome...

black mica ftw!

mine is so dirty.... no time with moving and a 10 month old.

 

[ScratchNSniff]

I hear ya...I am just hoping I don't neglect this thing once I get it back...it is hard when you are not used to taking tons of care in something...I will need to start keeping it clean and away from harm...no more dents...haha...

 

[HKPRO5]

Paid for the bigger pulley today =)

 

[azuelke]

What shifter? My heat shield bolts did the same. I just worked around the heat shield, wasn't too bad.

TWM short shifter... they inlcude some spacers to bump the heat shield down away from the shifter since it is longer on the underside, I guess. Are these really needed, I haven't gotten any further since posting before.

Thanks...as you can see we decided to do the door mouldings where the vinyl was in Black mica as well...they were in rough shape, so figured we would do something a bit different...haven't seen that done before...the Black Mica looks great...the flake in it looks awesome...

I realized this when I picked up my MSP lip from paint. Holy crap is that a lot of flake. Did you get the lighter or darker paint? Odd question, but when I dropped in to check up on my lip, the painter wanted to compare his paint mix to the cars paint since there were a light and dark mix that could have been made.

 

[probin94]

TWM short shifter... they inlcude some spacers to bump the heat shield down away from the shifter since it is longer on the underside, I guess. Are these really needed, I haven't gotten any further since posting before.



i cut my heat shield off when i installed mine.

 

[ScratchNSniff]

I took my heatshield off...as for the paint...I just got what came out of the can...lol...

 

[JDMJNKY]

Talked to alex alil bit about this so Im picking up a new set of wheel's bbs speedline's in 16" gonna throw 195's on them and give the p5 a nice drop here's what they look like just gotta pay for them tomorrow.

 

[ScratchNSniff]

Those don't look to bad...what are the specs on them...

 

[JDMJNKY]

16x7 5x114.3. +20 ^^^

 

[slideshow240]

Talked to alex alil bit about this so Im picking up a new set of wheel's bbs speedline's in 16" gonna throw 195's on them and give the p5 a nice drop here's what they look like just gotta pay for them tomorrow.

if they were 8" wide that'd be siiiiiiiiiiiiick but nice wheels none the less!