What have you done to your MSP today?
- Thread starter baconbitz
- Start date
shane02pro5
25ish_psi
- :
- New Caney TX
Has to be broken or very bent valve or broken rod even without rings at all you can build several pounds of pressure unless a nice chunk of piston detonated and melted into a blob in the cylinder which would make an obviously bad sound and there would be oil in the cylinder. What did the park plugs look like?
TheDirtyGoatee
Member
- :
- 2008 Mazda MX-5 5MT PRHT
2088 MSP: Can we get a wider shot to see the car as a whole. Looks good from here though.
sucks about you motor mild.
i plan on paying for a few more things before the first of the year(ie corksport 80mm, new yokohomo sdrive tires, 3inch dp, ms6 front and rear brakes, and maybe one or two other things) and im driving to orlando and back in december. and this got me thinking, im gonna start picking stuff up to go forged after the first of the year. slowly buying a part here, a part there. and pick up a spare block along the way. and after its built, im getting a haltech.
i plan on paying for a few more things before the first of the year(ie corksport 80mm, new yokohomo sdrive tires, 3inch dp, ms6 front and rear brakes, and maybe one or two other things) and im driving to orlando and back in december. and this got me thinking, im gonna start picking stuff up to go forged after the first of the year. slowly buying a part here, a part there. and pick up a spare block along the way. and after its built, im getting a haltech.
shane02pro5
25ish_psi
- :
- New Caney TX
Its the only way to enjoy these cars and sleep at night not wondering if shes gonna make it another day!
Speaking of enjoying them...got my Rc750's in and spliced into the harness with bullet connectors for swapping back for emissions. Re-tuning for them this morning
Speaking of enjoying them...got my Rc750's in and spliced into the harness with bullet connectors for swapping back for emissions. Re-tuning for them this morning
justanothermp5
Banned
- :
- Rust Bucket
ahh true, didnt think about that...that is pretty weird that there is 0, some serious damage must have happened
Its the only way to enjoy these cars and sleep at night not wondering if shes gonna make it another day!
Speaking of enjoying them...got my Rc750's in and spliced into the harness with bullet connectors for swapping back for emissions. Re-tuning for them this morning
holy s***, 750's? thats gigantic lol
shane02pro5
25ish_psi
- :
- New Caney TX
25ish_psi coming soon
FlyinHawaiian
Member
- :
- Mazdaspeed Protege #1460
Feeling kinda bored with my car lately. I need to fix the mani leak before winter hits. Don't owe anything since I paid cash for it and I've been too lazy to keep up on my CF projects. Cooler weather has been nice for the turbo, though...
Outlawstar98
Member
- :
- 2003 MazdaSpeed Protege / 2013 BRZ
Projects, DO THEM! stop being so american!
Outlawstar98
Member
- :
- 2003 MazdaSpeed Protege / 2013 BRZ
Projects, DO THEM! stop being so american!
also finalized the front mount install, so here are the updates:
more details here: http://s766.photobucket.com/albums/xx303/jchimei/FMIC and brakes/
still planning to stencil out MAZDASPEED on the front mount as well, but that will come later.
more details here: http://s766.photobucket.com/albums/xx303/jchimei/FMIC and brakes/
still planning to stencil out MAZDASPEED on the front mount as well, but that will come later.
Wagonbacker9
Member
- :
- 2004 'Hoe
you should probably cap off the blowoff port on that injen...
yeah i'll replace it in a couple of days
Ricktalife
Member
- :
- 2012 Subaru WRX
Wtf..that's the same placement that I had for my relocated MAF and I still had turkey and a bad idle. You having any problems?
Wagonbacker9
Member
- :
- 2004 'Hoe
MAF placement will have nothing to do with turkey...
Ricktalife
Member
- :
- 2012 Subaru WRX
But I did it so I could run BOV only, and whenever I took off the BPV I got turkey.
got to drive around on my new brakes today. and holy. aftermarket ftw.. much better. ill defintely do the rears sooner than later. after the sportlines are installed. then start saving up for a steedspeed manifold. Cant decide 100% on what i wanna do with the car down the road.. forge it and up the boost on stock turbo, or go t3 ect. was thinking of getting the t3 manifold and having him make me a vband block off with an o2 bung in it.
if nothing else, will make the turbo easier to get at.
if nothing else, will make the turbo easier to get at.
New Posts and Comments
- Article
