What have you done to your MS3 today?

So when is 400 a bad number for fuel pressure. I did a datalog today and @ idle im at 425 to 430. And on a decelleration with the throttle closed it was as low as 285. but at WOT w/ boost its well above 1600-1700 PSI
 
Washed all the dirt and pollen off off that's been sitting on it for 2 days. And hit it with some Meguiars quik wax. I feel much better now.
 
good to get back in her isnt it, Mike?!
The reason i mentioned plugs, is that the old school way of tuning a carb was to check the plugs for a rich or lean condition.
The way we do it nowadays is to monitor the air fuel ratios with a wideband o2. I have been making a suggestion or two because i want you to have a long and happy relationship with your speed3!
8.5 are you running stock internal wastegate?
 
washed it! and removed dried mango from the fenders that i ran over in the street...who leaves mango??

ordered some stickers from fatlace and gonna order a g2 brake paint kit.
 
Yes stock wastegate.

Current powetrain mods

Sri/tip/fmic/cpe hpfp/tp/cbe

Ap tuned by dustin to 20psi

Getting very close to maxing the wgdc tho
 
Had some grip bolted on. :)

IMG_0197.jpg


IMG_0194.jpg
 
sub stealthbox installed.

It seemed a little wobbly in there with just the one bolt to hold it in. After looking around in the hole, I saw a tab with a threaded hole in it (M8, probably 1.25 pitch). I tried to figure out where the bolt would go though in the steathbox and drilled a hole. I couldn't get it to thread, so I just got a couple extra washers and used a self tap screw and sealed the washers with silicone. Now the box is IN THERE.
 
Back