noobinacan
Member
washed
clay bar'd
waxed
clay bar'd
waxed
What have you done to your MS3 today?
- Thread starter ZoomVT
- Start date
oaklandopen
Member
did you use too much elbow grease or somethign? lulz
noobinacan
Member
ha...yes. I spent like 3 hrs just on the outside...lol
and its gonna rain today..btw
I'll probably clean the inside a lil today
ha...yes. I spent like 3 hrs just on the outside...lol
and its gonna rain today..btw
I'll probably clean the inside a lil today
Lol always happens, haha spend all that time on the car to have it rain, or a bird crap on it.
chief_wiggum
Member
- :
- 2008.5 Mazdaspeed3-2010 Mazda5 GT
Summer tires off...all-seasons on.
I hate when that happens. Last sunday I washed my car and a soon as I pulled out of the garage mother nature decided to blow dirt all over. So I just said f*** it lol.
Last edited:
liquidflem
Member
- :
- MS3
Last autocross of the season! Was first place (street tire - DS) after first heat (wet). Totally screwed second heat (last 2 runs).
Saskatchewan17
Member
- :
- 2008 TR Mazdaspeed 3
Replaced my horrbily cheap looking zip ties from the boost gauge install with worm gears... washed her up nicely, and found a spot of curb rash. (gah)
2 for 3 ain't bad in my book.
2 for 3 ain't bad in my book.
Same here. Replaced the stockers with a shiatload of tread left (will go on sale for stupid cheap) with 235/40-18 Kumho Ecsta LX Platinums. So far so good: smooth, comfortable, quiet, and by going wider, I don't feel like I lost any lateral traction taking some spirited corners.
oaklandopen
Member
oil change, tire rotation. got about 3/32'' all around after 27k miles. brake pads are 8/32'' in the front, and 10 and 11/32'' in the rear
also took a look at a couple things while i was under the car and wanted the mazdaspeed suspension and mazdaspeed cbe. checked the mscai filter too and it's still on there and clean.
pretty much a general day of maintenance
also took a look at a couple things while i was under the car and wanted the mazdaspeed suspension and mazdaspeed cbe. checked the mscai filter too and it's still on there and clean.
pretty much a general day of maintenance
mr_mazda329
Member
- :
- 97 Mazda Miata; 09 CWP Mazdaspeed 3
RADAR THIS
Member
- :
- MS3 SP23 ELEMENT TUNDRA
finished the hand job. (lol2) i mean paint job on the lip. now i am letting the sun bake it...lol my lips getting baked...
Last edited:
Dyno'd the car yesterday. Will upload the scan of it tomorrow but here's the video.
264hp@5500/274ft-lbs@4700: Mazdaspeed CAI as SRI, Forge Bypass Valve (yellow spring, 1 shim). Hood closed
261hp/261ft-lbs was the first run with the hood open.e
http://www.youtube.com/watch?v=zxVr2slo4Dg
264hp@5500/274ft-lbs@4700: Mazdaspeed CAI as SRI, Forge Bypass Valve (yellow spring, 1 shim). Hood closed
261hp/261ft-lbs was the first run with the hood open.e
http://www.youtube.com/watch?v=zxVr2slo4Dg
mr_mazda329
Member
- :
- 97 Mazda Miata; 09 CWP Mazdaspeed 3
Saskatchewan17
Member
- :
- 2008 TR Mazdaspeed 3
CAI and BPV and that's it? Awesome numbers for just those mods.
RADAR THIS
Member
- :
- MS3 SP23 ELEMENT TUNDRA
i wish surgeline was closer
Nliiitend1
Member
Rotated my NT-05s, cleaned and conditioned the leather (Zaino FTMFW!), and vacuumed/cleaned the interior.
///M Compact
Member
I drove mine across town to look at a car I was interested in. It was crap(the other car- NOT the MS3)
mr_mazda329
Member
- :
- 97 Mazda Miata; 09 CWP Mazdaspeed 3
Where did you get your NT-05's?!?!
