Water injection

[bigdawg181]

Anyone using the water injection on there ms3??? if so how do you like it or not... I'am thinking about putting it on my ms3 along with my ZEX N2O kit.

 

[08ms3bm]

Are you injecting the nitrous or using it to cool the temps at the intercooler?

 

[PerformanceRacing]

I believe the highest HP Speed3 was on meth at 353whp? 349? Something like that.

 

[bigdawg181]

i have nitrous already going in to the turbo(65 shot) but i'am looking for more power and trying to be a little easyer on the pistons lol.... a have read that water/meth is alot safer on the motor and will give me the same power than nos is giving me

 

[08ms3bm]

Some claim it bumps octane levels up to about 120, so more boost can be run without detination. It is also cooling combustion

 

[Haltech]

i have nitrous already going in to the turbo(65 shot) but i'am looking for more power and trying to be a little easyer on the pistons lol.... a have read that water/meth is alot safer on the motor and will give me the same power than nos is giving me

Only if you raise the timing, you will see benefits..

 

[mazdaspeed32007]

Only if you raise the timing, you will see benefits..

quick threadjack....haltech....can you get me a few pics of your fogs? thanks.

 

[Ben Nast]

i have nitrous already going in to the turbo(65 shot) but i'am looking for more power and trying to be a little easyer on the pistons lol.... a have read that water/meth is alot safer on the motor and will give me the same power than nos is giving me

Your running nos on your ms3?(crazy)(crazy)(crazy)

 

[bigdawg181]

yep.. for about 9,000 miles and not one problem
the biggest bang for the buck

 

[mrlilguy157]

yep.. for about 9,000 miles and not one problem
the biggest bang for the buck

dyno charts?

 

[samsel450r]

yep.. for about 9,000 miles and not one problem
the biggest bang for the buck

pics!!!!????

 

[EngulfinFlames]

I've Seen his car, he indeed is running nitrous. I would like to try spraying my intercooler.

 

[bigdawg181]

when i'am on street tires its all spin and no win...lol. but when i put on the nitto 01 DOT tires it's hold on this thing is moving

 

[bigdawg181]

i forgot no dyno yet, i have one or two more things to do then i'll be going to the shop for some dyno pulls

 

[mazdaspeed32007]

when i'am on street tires its all spin and no win...lol. but when i put on the nitto 01 DOT tires it's hold on this thing is moving

how do the axles hold up in this thing? im not sure what the specs are for the amount of tq and hp they can withstand, but with some drag tires you could seriously **** your front end right up no?

 

[ericrapp]

Yes i am running nitto also and have been warned about axle. 32007 so you throw a couple of axles through the windshield. Just call The drive Shaft shop. You probably already have all that 181. cooler, timing, good

 

[ericrapp]

dawg check Sport Compact article "wet spot" yes really, Install of AEM injection kit on NSX might help. I have been thinking about this also

 

[bigdawg181]

dude i could not find it but thanks just the same.. if you have a link post it please

 

[ericrapp]

I ripped pages out months ago. They did a aem meth kit under the Install pages In January but I could not find online either. I think page 100.Good luck!