VTCS correct hookup

[SicMSP03.5]

So I did an FSZE SWAP and I would like to see if anyone is till using there VTCS and if I can get pics of how they have there hooked up thanks.


Sent from my iPhone using Tapatalk

 

[hornsfan10609]

With the stock IM? Hook it up the same as stock. I didn't think the ZE IM had VTCS

 

[SicMSP03.5]

Yeah I'm wondering what stock is lol


Sent from my iPhone using Tapatalk

 

[SicMSP03.5]

I bought the car and it didn't have complete hookup it was left open the whole time


Sent from my iPhone using Tapatalk

 

[hornsfan10609]

Does your IM have the VTCS flaps? If it doesn't you don't need to hook up the vac lines just plug the solenoid in.

 

[i12drivemyMP5]

When I did mine, instead of putting the bolt in the end I cut the actuator rod off even with the first runner, put it back in the original spot and left the actuator in place just like it was. So from the outside it looks same as it did from factory but no rod or flaps in any of the runners and the holes filled with quicksteel hi temp and slight P&P done.

 

[SicMSP03.5]

Thanks for the help, I'm done and everything runs well.


Sent from my iPhone using Tapatalk