Tce Willwood Brakes!!!

[KING13]

I spoke with todd and if we can get a few commitments to these kits he will give us a yet to be determined discount. Considering his prices are already rock bottom as is. I think this would be a good purchase for those of us who are going turbo. Maybe an autoxer or for show value. Put your name down if your in.

1.King13
2.
3.
4.
5.
6.
7.
8.
9.
10.

 

[ultimazda3]

what kind of $$$$ are we talking about, because i dont mind indulging my car with expensive sheet but i heard these were going to cost like 3k in which case i would rather buy a turbo for 1k more...

 

[mobomelter]

didn't someone already buy that kit? i think he stated it was around 2 grand and that his 19-inch wheels barely cleared the caliper.

 

[mobomelter]

didn't someone already buy that kit? i think he stated it was around 2 grand and that his 19-inch wheels barely cleared the caliper.

the thread i was talking about.

 

[KING13]

The front kit runs about $1250.00 with 4 piston front calipers, SS lines, pads, and 13" rotors(the narrow 6 piston caliper is a $300 upgrade). The rear kit is about $550.00 with brakets to relocate the stock calipers, SS lines, and 11.75" rotors.They cleared his 19"s, 17's would be a squeeze.

 

[goldwing2000]

According to ssinstaller, 17" wheels won't fit over the 6-piston calipers.
18" minimum wheel size.
Don't know about the 4-pistons, though.

 

[KING13]

SSinstaller

Just to clarify a little, these brakes should fit plenty of aftermarket 17" wheels, it just depends on how "brake friendly" the spokers are. My 19" whelss have a big lip on them, so I don't have much clearance between the spokes and the caliper, but a 17", 18",or 19" without a big lip should clear the calipers without problems.

 

[mobomelter]

they won't clear stock wheels. and you better have a few pairs of rims lieing around when you install the brakes to find out which ones clear.