Stuff I found on eBay or Craigslist Today (NOT FOR PERSONAL SALES)

4-2-1 header...rusted a bit, but cheap...

http://cgi.ebay.com/01-02-03-Mazda-...ryZ33631QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Mazdaspeed pedals...decent price

http://cgi.ebay.com/mazda-mazdaspee...eZWD1VQQtrksidZp1638.m118.l1247QQcmdZViewItem

HKS Axle-back...

http://cgi.ebay.com/HKS-Hi-Power-Ex...ryZ33636QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Dimming/Compass rear view mirror...
http://cgi.ebay.com/2003-Mazda-Prot...ryZ33699QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I bored can't ya tell....20 minutes till go home time...

 

[andrew.savage]

Good deal on RX-8.

Just wanted everyone to see this. It's from Liberty Mazda in East Hartford. Just showing the good deal.

 

[tricky]

He also says he's got a CF trunk but it's not listed under his other items??

 

[Protege03ak46]

not much info

Lowering Springs for Mazda Protege
http://cgi.ebay.com/ebaymotors/NEW-...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

dose anyone know if these are anygood i really want to go lowered

 

[kudakev615]

its only for the fronts and theyre no-name so im going with NO DICE. id highly red this mazdaspeed kit for a beginners setup. and considering what you get for the price the benefits will be well worth it
http://cgi.ebay.com/ebaymotors/Mazd...c0.m245&_trkparms=65:12|39:1|72:1205|240:1318

 

[Protege03ak46]

thanks, that will deff be my next buy. i just got to get the money first, lol. im tryin to get a job so it will be the first buy on the first paycheck. good thing theres 8 available.

so will this be a handling overhaul. is it really noticeable???


thanks for the advice

 

[fishdonotbounce]

You can compare it to Driving a minivan through curves and then driving a compact car through the turns. It's a huge difference.

 

[Scorch03]

Does the MSP kit lower the car at all. If it does I'l seriously buy it ASAP, if not I'll have to think a bit... I hate that huge wheel gap.

 

[Dpwhitehead1]

Does the MSP kit lower the car at all. If it does I'l seriously buy it ASAP, if not I'll have to think a bit... I hate that huge wheel gap.

yes. it does.

kuda-thanks for the link. i THINK i'm gonna be picking up the hood/trunk.

 

[ScratchNSniff]

thanks, that will deff be my next buy. i just got to get the money first, lol. im tryin to get a job so it will be the first buy on the first paycheck. good thing theres 8 available.

so will this be a handling overhaul. is it really noticeable???


thanks for the advice

Does the MSP kit lower the car at all. If it does I'l seriously buy it ASAP, if not I'll have to think a bit... I hate that huge wheel gap.

Guys...that is a good setup and link, but the only problem there is that it doesn't include the bushings/brackets/endlinks in the $280 price...not to mention that you won't need the front sway or strut tower bar...with that being said...you can pick up a rear sway for around $100 on here with all hardware as well as the springs for around $50 plus shipping...

Also if you are interested in just the springs...SCMP3 has some FS right now and I am sure he would go lower on his price...and yes it does lower the car a bit...I had them on my car for a few months...then switched to Tein S-Techs...

 

[Scorch03]

Thanks Boostd. I just messaged him.

Where would I get the rest of that stuff... and about what would it cost. Maybe I'll just collect it all slowly using the site if this isn't as good a deal as i was thinking. Thanks in advance... I would have been very confused when i got it.

 

[Protege03ak46]

We'll i'm looking for something that'll turn like a son of a gun, lol. I live in Washington and there are ALOT of sweet driving roads through forests and stuff. I'll never forget when my dads friend took me out in his 240 with a skyline frontclip, right hand drive, motor and everything. Beautiful car, had coilovers so it handled like a dream. He tookme through this park with 30 miles of twistys. He let me drive it. I had the biggest s*** eatting grin you could ever emagin. It was the most fun I've ever had in a car. That was the turning point for me. It's not about power for me, it's about handling. That's what I want.
Without spending a fortune, will this give that to me??

 

[ScratchNSniff]

It will give it to you, but like I said...half of it you don't need, and you can get the good pieces out of there for much less in the FS section...

 

[Protege03ak46]

Ok thanks

 

[D-rock240]

http://cgi.ebay.com/ebaymotors/Reverse-Cowl-Carbon-Fiber-Hood-for-99-03-Mazda-Protege_W0QQitemZ320389107105QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item4a98adcda1&_trksid=p4506.c0.m245&_trkparms=65%3A12%7C39%3A1%7C72%3A1205%7C240%3A1318

reverse cowl gemini carbon hood with center painted maroon. starting dib one dolla with no reserve. local pick up or shipping. gr8 dealzzz

I think I know whos hood that used to be. Haven't seen his car in a couple years so he may have parted out. Had a BC2 kit and lots of CF.

 

[kudakev615]

^now that you mention it, i remember that car too

 

[YOUNGMP3]

I'm thinking of buying the hood. I need one quick.

 

[prdracing]

UniChip

http://cgi.ebay.com/ebaymotors/Unichip-for-2003-Mazda-protege_W0QQitemZ270416031253QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item3ef60d2e15&_trksid=p3911.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1205%7C240%3A1318

Wings West hood bonnets (?)

http://cgi.ebay.com/ebaymotors/Wings-West-Mazda-Protege-Hood-Bonnets_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7c39Q3a1Q7c72Q3a1171Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a7Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ef60991e3QQitemZ270415794659QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[Flash5]

yea those hood bonnets are too much, wings west lol what were they thinking

 

[xDJ DUBx]

Holy geezzzz, I didn't even look at the price, wow. They should be like 50 bucks. lol.

 

[SeR_Cyclops]

Lol I have the WW kit with no fenderflares or the hood things and i hate it. it looks horrible.