Spool Springs Reorder

[spoolinmp3]

Its time to reorder these. I usually do not have any available by the time we get them in stock. Just trying to gauge how many people want in on this. So far I have 2 orders. I was planning on getting 10 sets.
If anybody is intersted let me know and I can start a list on here
Thanks

 

[tmht]

I need to figure out how much install + alignment is going to cost me first, but I may be interested.

 

[FuNwaGoN]

TMHT ...trust me you will love these springs. Installation should cost you about $100-150 depending on where you take it if you don't do it yourself. And alignment for front and rear is $70 from your mazda dealer. As I said well worth it.

BTW Terry if I know I didn't get my springs through you but I bought them off of another forum member. anyway I did a howto while I was installing my springs and since it is your product if you would like the how-to to offer to your customers I would be more than happy to send it over. Just Pm me and let me know.

 

[spoolinmp3]

Cool I am PMing you now

 

[igdrasil]

Its time to reorder these. I usually do not have any available by the time we get them in stock. Just trying to gauge how many people want in on this. So far I have 2 orders. I was planning on getting 10 sets.
If anybody is intersted let me know and I can start a list on here
Thanks

how much? pm me

if the price is good I may try them

 

[tmht]

Two more quick questions...

What kind of drop can I expect?
And...
Is the price going to remain the same?

 

[2K3 MSP]

Its time to reorder these. I usually do not have any available by the time we get them in stock. Just trying to gauge how many people want in on this. So far I have 2 orders. I was planning on getting 10 sets.
If anybody is intersted let me know and I can start a list on here
Thanks

What's up Terry...I just got off the phone with you...I definately want a set of your springs, so I'll try to get that deposit to you ASAP. Thanks for your help!!

Done!!

 

[spoolinmp3]

The springs are 199
They lower the car 2 inches all around once the springs settle.
I got your deposit 2K3 Mazdaspeed, I will send you an invoice tommorow

 

[slamprotege5]

I thought the P5 handled good from factory, but with the 18s' and Spool springs handling is off the wall. Very easy to install, and yes the rear does continue to settle. The night I installed mine, I filled the tank with gas, and loaded the trunk with everything I could find. Oh by the way Terry, wondering if you could send me some stickers. Need a SPOOL sticker for my back window Great product. Hope this helps you guys that arent sure. I went from Skunk2 coilovers to Spools and an amazing jump in ride quality and cornering ability. Later

 

[tmht]

Looks like I'll be calling Fri. to put a deposit down. Now I need to find a friend with a garage to help me install them. I live in an apt. with no off-street parking and the street is on a hill. So doing this at my place is out. Or find a shop to do it that won't take me to the cleaners. So if anyone in San Diego has suggestions, let me know.

 

[igdrasil]

Count me in...

Im In for this buy!

...I will take this oportunity to upgrade the struts too and maybe the swaybars with AWR, this is going to be a killer setup. If only i could get the Autoexe Rear Upper Strut bar...

 

[Black-Knights]

Spool springs

If these springs will fit a 2003 mazda protege lx sedan then I'm in. Just pm me or email me sometime and how much is shipping on the springs....thanks and let me know

 

[Jliao]

This probably already been asked before...

Do I need anything else beside the Spool Spring to have the stock ride? stuff like new strut, or damper etc..?

Thanks

 

[PA_MP3_Man]

ohhh ohh, what to do. Get spool springs or take evolution driving course?!?! How long do I have to think about it Terry?

 

[falkofire]

so I am looking at about 280 cad....is that with shipping included? if it is that is cheaper than the eibachs for 308 I believe and I would be quite interested in a set in the very near future..as in the end of this month...

 

[spoolinmp3]

Shipping is about 25-39 dollars in the U.S
Shipping to Canada is $89 dollars via US postal or we can send it for like 45 dollars but it will take a couple weeks.
The springs will fit the ES and the ride is simply amazing.

It would be a good idea to upgrade struts but its not necessary. I have a limit of 12 orders for this batch. I already have 8 people with deposits for the springs. If you are intersted you can paypal us with a payment of 50 dollars to secure your set to spoolits@aol.com or call us @ 804-897-1350

 

[PA_MP3_Man]

Damn you terry. I couldn't take the chance of not getting the springs this time since you are only getting 12 sets of em and 8 are gone already. You're pressure tactics work, you are wise lol . So count me in, you should have my deposite through paypal.

 

[spoolinmp3]

Thats funny
Actually if you are short on cash I can reserve a set for ya and hold them till they come in since you are special

 

[spoolinmp3]

Damn didnt realize I already got your deposit

 

[derrick1623]

terry, think about getting coilovers for the mp3???

i would love it if you sold b+g, or tein, or jic...PLEASE!!!