Spicy MSP Partout!! Tons of parts!

Status
Not open for further replies.
I am back from Costa Rica, I have started working right away pretty much and I have a lot of stuff to wrap up and finish for college/papers from trip, but I will be getting caught up with the forums, it will just take me a couple days, thanks for the patience. (6/8/2010)
-max


ALL NEW PLEASE READ 3/25/2010- I am back from break for the next few days, I need this stuff out, I will make sure to keep track of this thread when I go back to school.. as long as these guidelines are followed: (follow these please, it will make things much much easier, I had no clue what I was doing when I first started this, but I need these parts gone.. now)
First Page is updated as of 5/13/2010 to parts that are sold/available (scroll down for the list/parts) so you do not have to look through the pages, there is nothing there that is not posted here, for the most part
Read Carefully Please before you send me a pm, PLEASE-
1.) Send me a pm, no need to post on the thread unless you have a question that you need to ask other people such as fitment issues or anything like that, go ahead, also if you like to add feedback, feel free.

2.) in the private message subject, state the part that you are interested in, if it is too long, state the major parts first so I know what you are looking for easier.

3.) When you send the pm, GIVE ME AN OFFER, all I will do if you do not give me an offer for the part is ask you for an offer, I will list prices for some parts that I have looked at and found people selling them for, but other parts, give me an offer.. a FAIR offer, so I have something to go off of.. everything is without shipping costs, unless I state otherwise, and the prices with shipping are within the US, outside will cost more obviously.


Also-

4.) On the paypal which I realized I had forgot to add back onto this page, is Firerblazer360@cs.com please include your full address and the part your buying in the notes/comments or subject or something like that on the invoice from paypal. thanks

5.) Parts that need to be freighted such as doors, trunks, bumpers ect... I have no experience doing that, I would prefer local pick ups, but will be willing to ship, if you can find a method to freight it that you are willing to pay, feel free to do so, things will go much much faster and I will most likely give you a discount more than I might already have.

6.) All other parts, shipping costs are out of my hands, so when I tell you the shipping costs, please do not try to drop the price of the product, I do not control shipping, the price for the product should not be less than it's worth just because it will cost more to ship.

7.)- Make sure you are serious about buying these parts, FIRST COME FIRST SERVE, all prices are negotiable! so please follow these guidelines, people that have sent me pms before will get first choice obviously and I am sorry that this has taken so damn long, I didn't know what I was getting myself into , and I am no salesman, and with 22.6k views (3/24/2010) you would think I'd be able to finish this, but there are a lot of parts in a car, and not a lot of time with school...and there is not enough time to do both well, so school wins.

8.) If you are fast about getting back to me and follow these guidelines, I promise I will get back to you in a timely manner, if for some reason this does not happen, especially if you are a local pick up call me please, it will get you the parts much faster, leave me a message if I am not there (most likely in class) and we can work something out quickly. 203-313-6131 and please, please only call me if you are seriously interestedin an item and am willing to work out a price and any shipping or whatnot quickly.

I will post pics and prices of parts that I know below, I have lots of other pics in the photobucket link below.. please use it!http://s546.photobucket.com/home/Sack107/allalbums

-all pics have the dates posted, at least most of them, nothing has changed, there is a separate album with the parts that I have taken pics of what i have left (I didn't not get all of the parts, just because there are so many, but it includes most)
 
Last edited:
how much for:

-the stock alarm sensor and brain
-the big, middle console plastic piece including the little compartment
-the pair of mirrors
 
Last edited:
just a reminder, if you guys could pm me along with the posts, or at least pm me, just because I either forget to check this, or after replying to all the pms.. well I forget but anyways:
MSPM1chele I will send you a pm
Tzar177, I do have those, or at least the panels and carpet, the board I used on my new msp, send me a pm with your offer please
and Topher I will check to see if I still have the stock a pillar (just the driver side right?) I don't know I think I sold it already but I will check again
 
pm sent back, thanks for pming though

MSPM1chele, get back to me if your still interested for those parts when you can, thanks
 
how's the condition of the passenger side headlight?? I just need the Clear Lens cover, if's it still good. also do you have the front bumper too?? what else do you have left??
 
ya I do, they are still on the struts, I need to get them off, but just make an offer and I will get back to you, thanks
-max
 
sorry, someone is interested in buying the whole bumper/lip altogether at the moment, also I couldn't get the rear lip off of the bumper because there was some serious industrial strength epoxy holding it together.. didn't want to risk damaging either piece. sorry
 
ok just wanted to update everyone, hopefully I will get some more/if not most of the stuff off the car, I still have a lot of the suspension stuff under the car to take off, a lot of it is rusty and is a PITA to get off, but once I do that I will be able to update this thread better and get the pics of everything I have

I have some engine parts that were not used, I will post pics and all that stuff of what I have left, and try to update the things that have been sold...

I still have A LOT of people that have pmed about stuff but never got back to me, I am open to all offers that are SERIOUS, I really just wanted to get the rest of this stuff sold, at a reasonable price, so feel free to pm me! The larger parts or things I have not yet packed, may take me a little longer to get ready, but if you hurry me along I will make sure to get it packed and shipped out asap.

ALSO, I would like to add that people that can PICK STUFF UP, I will give a discount too, especially the large parts that I would otherwise need to freight! all body panel parts are in great condition, the doors I am selling as whole, with everything but plastic panels and speakers with them, if you don't need it all, just sell the extra stuff to make some money back, I don't care, I will not charge for stuff that I do not want to take off... thanks and I still have a full garage and basement full of parts, so PLEASE if you pm me about something, please be serious about wanting it, and keep in touch with me,

-I still need to get back to a few people, but when I do pm you back, please keep in contact with me so I can get this stuff sold, it would be very much appreciated, I know people are busy like myself, and I reply to everyone at once so I do not loose track of people I have responded to, but I assume you really only have me to respond to most of the time, so just pm me to let me know what the deal is and if you want the item still or not.. anything would be helpful.

thank you
 
how much $$ the whole bumper/lip altogether shippep to puerto rico 00917??????

as I think I might have said in the post before, but not sure (didn't look) but the bumper and lip is pending sale, but if you are curious anyways, I am selling the whole things for $250 ($150 for lip, $100 for bumper, new they are $600 for spicy lip, and $300 for spicy bumper, I checked with my body shop on that one)

shipping I am not sure, because I would have to freight it because of the dimensions, I am new to finding the freight companies, but I heard that Bax is a good one but have yet to figure that out, I know that I had a one time deal with ups from business to business from CT (06804) to FL for the fender and door for $250.. but can't say for sure about the price of anything else with other companies. sorry
 
Status
Not open for further replies.
Back