Should I?

[que]

Crutchfield is having a sale on an Eclipse 2 channel amp, this one to be exact http://www.crutchfield.com/p_099EA2000/Eclipse-EA2000.html. My question is, is this worth getting? Or should I just wait for a 4 channel to power all the interior speakers?

 

[que]

Dang, no opinions at all?

 

[bgibb68]

what you gonna use it for??

 

[que]

It'll definately be powering my fronts, but what I'm wondering is it more worth it to just get a four channel & power all the speakers?

 

[bgibb68]

get a 4 ch....not worth it....now if you had a sub box and say wanted to add some 8" or 6x9 for good mid....worth it

 

[que]

Thanks for your input. I'll probably wait, cuz no I don't wanna add anymore for the mids. And I reallt don't wanna run three amps later if I decide to power the rear doors. If my rear hatch area was not a necessity then I would.

 

[bgibb68]

1 amp for subs(mono) unless you're planning to run BIG speakers.

a 4 ch for the doors and i do know some have run 12" subs with 2 6x9 or 8" for good mids with with a seperate 2 ch amp so...

 

[que]

I'm running a single 12 with an Eclipse single channel now. I just liked that amp cuz it would match what I already have. They do have a 4 channel that matches, just not on sale.

 

[bgibb68]

eclipese make awesome 4 ch...i picked one up local for 100 (100wrms per ch)....check all yor local shops....right now they should be cleaning house of this years stock....just hunt around....and if you find a good deal on a good one....doesn't mater if they match cause if ya stick under the pas seat no one will know but you....unless you're ocd of course

 

[que]

(lol) naw, not ocd. Was planning to build a shelf on the back & displaying them, but if I find a good 4 channel then I'll probably be on it.

 

[bgibb68]

and you're gonna rerun wire all the way to the back...EKKK....i've seen it look good though....i have my sub amp and cap mounted to the box where i can pull it out if i need the space and i have the 4ch under the pass seat....i cut that floor heater and sealed it up with silicone

 

[que]

I don't think I'll need to run my cables to the back all over again. I ran 4 gauge all the way to the back already, so I"ll just ad a distribution block then run the next power wire from there.

 

[bgibb68]

I don't think I'll need to run my cables to the back all over again. I ran 4 gauge all the way to the back already, so I"ll just ad a distribution block then run the next power wire from there.

i was talking about speaker wire there ya goose(chair)