shifter linkage bushings
- Thread starter faridk89
- Start date
www.Rock-Auto.com or www.onlinemazdaparts.com for OEM bushings.
www.protegegarage.com for aftermarket urethane bushings.
Protege garage is a verified vendor on this forum. They have their own section on here.
www.protegegarage.com for aftermarket urethane bushings.
Protege garage is a verified vendor on this forum. They have their own section on here.
http://www.protegegarage.com/product_info.php?cPath=21_31_141&products_id=530
I was having trouble finding them on those other 2 sites. They may not carry it...
I'm not sure, but I need to get some stuff done here at work b4 I leave in 30 min. lol.
I was having trouble finding them on those other 2 sites. They may not carry it...
I'm not sure, but I need to get some stuff done here at work b4 I leave in 30 min. lol.
yeah i must be retarded lol it was right there....when you have a second, is this just the shift linkage bushing or the base bushing also...thanks a lot im terrible with car parts
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
I think I read somewhere on here that the Corksport bronzeoil bushings were the best ones to get, just wanted to throw that out there.
http://www.corksport.com/corksport-bronze-oil-shifter-bushings.html
http://www.corksport.com/corksport-bronze-oil-shifter-bushings.html
and these will fit the p5?
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
yes it says on the site they do
hmm... do they work with the TWM short shifter by any chance?
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
If you used the stock hardware it should fit, it says on the site to upgrade the bushings when you get a short shifter.
don't do it.... the stock ones are plastic pieces of crap....
i was able to use one pair and installed it on the transmission side... it's a night and day difference... tighter shifter, crisp shifting... it feels awesome...
oh and it doesn't work on the TWM SS... the TWM SS has bearing instead on the bottom of the shifter... probably way better than bushings i suppose
You can still use the Corksport bushings with the TWM, just not where the shifter connects to the linkage. You can use them in the front where the linkage connects to the transmission. So basically you'll have a couple extra bronzeoil bushings with the corksport/twm combo.
yeah i ended up getting upper and lower for 7 bucks from mazda
lol, i was wondering would the protege speed ones work with the p5?yeah i ended up getting upper and lower for 7 bucks from mazda
i would think there is no difference between the two
i doubt it... maybe one of the msp guys can tune in here?
- :
- 03.5 MSP
no they don't, just checked my friend. 
