shark fin antenna help

[mglavina]

I've been looking around and I've seen shark fins on other people's cars and I think it looks great. I was thinking of buying one but the ones I've seen have a huge price range...

the ones on rpm store are $79.95...http://www.therpmstore.com/product_info.php?cPath=26&products_id=253

But I've seen some on ebay for like $1.99-$14.99:S?????

Some also have different names (VG shark fin, Euro shark fin?) and look different and are apprently some can be functionable and non functionable?

My main question is what should I buy? I want good quality stuff that will last, so I'm willing to pay. Any pictures of your shark fins or any advice would be appreciated .

 

[VRMS6]

If you get a non functional one it will be just the dummy housing without a antenna for the radio. You will have 0 radio reception for am/fm.
A functional one will have a antenna that will take the place of your whip antenna. Reception will be a bt degraded but you will still have am/fm radio reception. The cheaper ones either will not come painted or the paint quality will be that of a 2yr old with a crayon that will not match your car color... Do yourself a favor and get one off a reputable vendor on this site you will not regret it....

 

[mglavina]

thanks for the help I think I'll look into the one off the rpm store. How much did you pay for yours VRMS6? Did yours comes painted and is it fully functionable?

 

[babz437]

i paid $79 dollars and got a fully functional one at rpm store. great purchase. comes painted to match. just pick the color of your car.

 

[mglavina]

79 shipped? did it come with everything to be installed? did you install it yourself and was it easy?

 

[babz437]

79 shipped? did it come with everything to be installed? did you install it yourself and was it easy?

i dont remember what it was shipped. everything was there to install. installation was very easy.

 

[mglavina]

thanks for the help babz437 and VRMS6, I think I'm going to order one

 

[babz437]

not a problem. you will be happy with the decision.

 

[Zixxspeed]

get it at the rpm store easy install, did it myself and its awesome

 

[Rivman]

Shark Fin Antenna

thanks for the help babz437 and VRMS6, I think I'm going to order one

Check out thier post here:
http://www.mazdas247.com/forum/showthread.php?t=123700376

 

[VRMS6]

I got mine at the $65 GB price from thr RPM store... Install is a breeze as you unscrew the stock antenna. Screw in the one that comes attached with the sharkfin. Peel off the tape covering n stick to the roof.. Easy as pie...

 

[VRMS6]

Oh yea it came painted and matched perfectly...

 

[RevLimitLaunch]

my sharkfin was PERFECT in every possible way. install was fast and easy obviously and a breeze! definitely an awesome mod and a great looker! paint matched flawlessly in every way as well. if you do anything cosmetic, this should be the first!

 

[aleelavine]

I am seriously considering getting this shark fin. I don't really care for the long antenna that sticks out so very much! But I'm just curious, anyone had any issues with car washes after installing the fin? I would love to not worry about touchless car washes, etc.

 

[VRMS6]

as long as its not the cloth wash you will be fine with a touchless wash and a sharkfin antenna....

 

[Zimmer]

how noticeable was the reception degradation?

also was any one have issues with the "stickiness" becoming "unsticky" over time?

thanks it does look good.

 

[MCB 5150]

I bought the VG shark fin antenna from theRPMstore.com for $79.95 and paid $5.00 extra for fast shipping. I ordered it 4/24/08 (Thursday) and it was delivered USPS the next Monday or Tuesday. I have a 2007 MS6 GT titanium gray, and the thing looks great and the color is matched perfect (looks stock). I haven't noticed any signal degradation driving around town. The installation was simple: unscrew the stock antenna, fasten the wire from the shark fin with the provided screw to the base, center and stick. As far as the "sticky" factor, when I took off the paper backing to install it, the adhesive stuck instantly to the surfact without applying pressure, so I can't imagine it coming loose any time soon. The base of the antenna is flat and the rear roof of the car is slightly curved, but the 3M adhesive has a foam-like layer that has some give to it to compensate for the roof's curve. No complaints so far.

 

[~JoJo~]

is it easy to take off?

 

[obsoletee]

is it easy to take off?

Just use some fishing line and "saw" it off, works fine.