Rota g-force

GunMetallic G-Force 235-40-18's

ms35.jpg

tire/wheel specs?
 
Im thinking same specs, but white on white.... Only in 3 thousand years when I can get
wheels
 
Fender rolling required? Or any rubbing when it's loaded down / driving hard in the turns?

never have rubbed it and have not had to roll at this point. driving poses no problems but when we bought 600 lbs of dirt from lowes we used my wife's cx7 to haul it so i can't speak to being fully loaded - come to think of it i don't think i have ever had more than 3 people in my car at once.
 
Fender rolling required? Or any rubbing when it's loaded down / driving hard in the turns?

The 18x8.5 +48 with 235/40/18 should be a direct bolt-on for MS3 with no fender modification at stock height. It might require a rear fender roll if the car is lowered.

-Tommy
 
i have 18x8.5 +48 on 245/40/18 didnt rub at stock height but once it is loased, it will rub crazy. sidewalls are being chewed up by the rear fender. once rolled, never rubbed since
 
i have 18x8.5 +48 on 245/40/18 didnt rub at stock height but once it is loased, it will rub crazy. sidewalls are being chewed up by the rear fender. once rolled, never rubbed since

I want to go to a 245, what tire are you using? Have any pics?
 
i have 18x8.5 +48 on 245/40/18 didnt rub at stock height but once it is loased, it will rub crazy. sidewalls are being chewed up by the rear fender. once rolled, never rubbed since

With the 245's how aggressive was that roll? Did you have the pull the fenders at all or was rolling the lip good enough?
 

New Threads and Articles

Back