Ramps

[Ms3InMd]

Hey I was just wondering for those who are using ramps to get under their car what brand do you have? I only ask because I haven't found any that fit. Thanks

 

[joesmazdaspeed]

umm i was reading in my dads bmw mag. and there wher some in there go to the bavarian motorsports web site and you might see them there

 

[Ms3InMd]

Yeah I had seen those before, but there 200 dollars.

 

[zoom-zoomhatch]

Just put blocks at the start of the ramps to pick the front end up a little so it won't rub, not sure what I have but it does the trick.

 

[Ms3InMd]

Thanks I'll try that.

 

[BSTD3]

I have Rhino Ramps and get up them with no issues. I do have to use two pieces of wood to raise the car before driving my Miata on the ramps (car is lowered).

Rhino ramps can be had at any auto parts store for like $30 or so...

 

[Ms3InMd]

So basically you put a piece of wood in front of the ramp before you drive up on to it. To give it that extra half inch.

 

[BSTD3]

So basically you put a piece of wood in front of the ramp before you drive up on to it. To give it that extra half inch.

Exactly. It brings the car up the proper height to drive up on the ramps without scraping.

 

[Stock-Speed3]

i made some of these

http://www.mustangworld.com/ourpics/News/mwramps/index.htm

 

[Jasonstiller]

all ive ever used for my sports cars are Rhino ramps. Longer than most but wont scrape anything

 

[Snowwolfe]

I used Rhino ramps for my 01 Corvette. If I could get a Vet on them without scraping you can get a Speed3 onto them.
Picked them up at Wal Mart for about 35 bucks.

 

[SSMS3]

Rhino's here as well and also have used pieces of wood if the car is too low