Question about corksport exaust

[Heathen23]

Its funny you say that because somebody else I spoke with said the Kartboy hangers cured his problem with the muffler sitting to high in the back. All I can says is Ill find out when i recieve my exhaust.

Although anything is possible it doesn't make sense to me. The kartboy hanger is a more ridged hanger thus holding it slightly higher and reducing sag. You need to move this exhaust down over 2 inches in the back for proper fitment.

Good luck with the exhaust. Maybe there is something I'm not considering and you will have excellent results w/o bending and the kartboys.

 

[Speedplease]

Yeah Thanks I ll find out whenever corksport decides to get their exhaust back in stock! START WELDING FASTER! J/K But no seriously hurry! I need my exhaust before the second week in june!

 

[CorkSport]

Ha!

 

[Sushi-Monster]

forget hercules and that bending crap... forget torching it either... I torched it and it melted the tubing... Just pull a Sushi-MSP if you will... lazy the exhaust system hanger on a angle... and hammer that bastard (lightly I guess... I just went crazy since I was soooo pissed at it!). It'll look much better and it'll be easier than bending with all your might.

 

[Swerny]

Is the rear lip onthe 2003.5 MSP lower than the one on the 2003 MSP ? It must be because I didn't bend my hangars or use longer ones , and I have plenty of clearance.
Just wondering. (pullup)

 

[CorkSport]

This is being made into a bigger deal than it is.... As mentioned before in here, all you need is a closed ended wrench to give a little tweak. That is it...

 

[celdridge]

This is being made into a bigger deal than it is.... As mentioned before in here, all you need is a closed ended wrench to give a little tweak. That is it...

Haha ... welcome to these boards ... you should know by now that you say one little thing and your gonna get flammed ... people have the patience of flys. (chair) (chair)

 

[Sushi-Monster]

This is being made into a bigger deal than it is.... As mentioned before in here, all you need is a closed ended wrench to give a little tweak. That is it...

Funny, if you knew that it wasn't such a big deal, why didn't you guys do it before shipping it out??? LOL

 

[itz_alan]

it drones like a bastard in the cabin.. outside it sounds soo nice.. if u give a little gas the droning calms down greatly.. so its ok then.. installing was pretty straight forward. i got a cat welded on my mid pipe with a bung so no cel.. maybe get a cat welded like me? who knows.. its worth 400 though!

 

[AJsMSP]

Any sound clips? I tried the ones on the Corksports site but they don't work. I am very interested in the exhaust, but I just want to know what it sounds like first.

 

[speedhawaii]

Funny, if you knew that it wasn't such a big deal, why didn't you guys do it before shipping it out??? LOL

really

 

[mazdmotorhead]

CorkSport

Please all be advised that the Forum member with the ID "Corksport" does not represent or speak for our company, Corksport. Therefore any information, opinions or advise he may provide is not coming from our staff and does not reflect our position.

Please post any inquiries, complaints, ideas, feedback, or even the occasional compliment to mazdmotorhead in this forum or to gary@corksport.com.

Thanks for your support!

 

[speedhawaii]

ok

 

[Speedplease]

Corksport is definitly the best company out there for mazda's but thats my opinion, Anyway Corksport thanks for the great products and keep em coming!

 

[AJsMSP]

About the droning sound. Is that with the silencer or no? I'm sure there is a difference but just would like to know.

 

[mdaj]

Droning is without the silencer.

 

[AJsMSP]

So then using the silencer is going to make much easier to live with. Still wanting to hear sound clips though. Links on Corksports web site are still not working.

 

[mazdaowner123]

Please all be advised that the Forum member with the ID "Corksport" does not represent or speak for our company, Corksport. Therefore any information, opinions or advise he may provide is not coming from our staff and does not reflect our position.

Please post any inquiries, complaints, ideas, feedback, or even the occasional compliment to mazdmotorhead in this forum or to gary@corksport.com.

Thanks for your support!

Does ben not work at corksport anymore or something?

~brian

 

[EnjoyMinuteMaid]

Yeah first of all if that guys is not affiliated with corksport then what the hell is going on...? Second, can anyone say the difference after they put a hi-flow cat on the corksport exhaust? and where do you get the bung placed in order to make the cel go away (before or after the cat)?

 

[speedhawaii]

after the cat