Post Pics of your RX-7

[eprx799]

Here's my 1st gen:

Nice 7 is it a an it7 or spec7 car? What is your exhaust setup? how many db does it make?
The front spoiler is a Kamei its actually made for the sa. If you can find one all you have to do is remove the front bumper and trim some of the bottom of the plastic off and it will go over the spoiler.
I had the sa bumpers on the car but when I started removing everything to make the car lighter for auto-x, I removed them and put a set of fb bumpers on the car. The sa bumpers are steel and weigh 30-35 lbs. each, I got the fb bumpers (which are aluminum) down to 10 lbs each.

 

[eprx799]

Another pic from the end of a wet weekend @ Mid-Ohio, I was running in Group 3/4 with NASA.

 

[Simon Tibbett]

Nice 7 is it a an it7 or spec7 car? What is your exhaust setup? how many db does it make?
The front spoiler is a Kamei its actually made for the sa. If you can find one all you have to do is remove the front bumper and trim some of the bottom of the plastic off and it will go over the spoiler.
I had the sa bumpers on the car but when I started removing everything to make the car lighter for auto-x, I removed them and put a set of fb bumpers on the car. The sa bumpers are steel and weigh 30-35 lbs. each, I got the fb bumpers (which are aluminum) down to 10 lbs each.

Thanks, it was a "Pro7" car from what I was told, I run it in IT7 now here in the SE though. I guess the difference between Spec7 and Pro7 was the exhaust? It has an unknown race header back to I forget what muffler that is you see but it's actually pretty quiet so I'm going to ditch it this season to see if I can find a tiny bit of top end. It was only at 88db on the back straight at Road Atlanta.

Thanks for the info on the bumper, looks good!

 

[Mazdamatic]

^ What a gem! I've always had a soft spot for white FCs.

I've posted these up in another forum. My never ending work in progress FB

those wheels...i must have....

 

[ngd298]

My favorite mod on the FC-

 

[eprx799]

My favorite mod on the FC-

Not a big fan of the cup holder on the door, if you leave it on the door and close it you windup with it all over yourself and your interior. besides like a Dbag salesman told one of my friends at the auto show 10 years ago about a Lambo "its a sports car your not supposed to drink in it."

 

[ngd298]

Yeah I'm not a fan of them at all, but no one ever sits over there since I drive the MZ2 99.9% of the time, so I decided to steal one out of my buddy's metro..haha. I hate power windows, locks, and stuff like that on a sports car but I'm a sucker for cupholders.

 

[eprx799]

I just cram the bottle of pop or water between the seat and the trans tunnel. as long as it has a cap it fine right there . It works in the RX -7 and the Miata.

 

[Mazdamatic]

my recently garage painted 82 GSL

nice to see another FB owner on here who dailies an MZ2 =]

 

[Natey]

New wheels.

 

[rx2nv]

My fd I have had for about 12 yrs.

 

[rx2nv]

My wife's 1993 fd3s she just bought a few weeks ago with only 13k original miles on it.

 

[Natey]

OEM mudguards. I also had the Zeal coilovers rebuilt by Endless.

 

[edwardzik]

https://imageshack.com/i/f0vKM6A6j

 

[edwardzik]

 

[edwardzik]

 

[edwardzik]

off road

 

[joeyfc3s]

my fc

FD swapped FC.Bridgeported REW,s5 turbo tranny.80mm 1.15 ar Qtrim turbonetics.
Cosmo intakes.20b tbody,ID injectors.
Microtech lt9

 

[LaraS]

 

[Camshaft]

Gorgeous car. Passed on a nearly identical '94 (Montego Blue over tan) that was traded on an ///M6 when I worked at a dealership. Two weeks later, the engine was blown and it was stolen out of the parking lot of the Mazda dealer we had taken it to. I still think about it sometimes.